We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rack-mount network switch, 48 RJ45 ports, four SFP+ uplinks, 1U height

Cisco Systems, Inc.

Cisco Systems, Inc. C9200L-48T-4X-E network switch 48-port 4×10G uplink

SKU CH-GWA1-0CGB4 MPN C9200L-48T-4X-E

Managed 48-port Gigabit Ethernet switch with four 10 Gigabit SFP+ uplinks, Layer 3 routing, stacking and redundant power in a 1U rack chassis

  • FormatRack-mountable
  • Network Management TypeManaged
  • Primary Port Speed10GBase-X 10/100/1000Base-T
  • ProtocolsTCP/IP
  • Weight11.02 lb
  • 48 Gigabit Ethernet ports connect many wired devices
  • Four 10 Gigabit SFP+ uplinks provide high-speed aggregation
  • Layer 3 routing enables inter-VLAN traffic control
  • Stacking port allows unified management of multiple units
  • Redundant power supply support increases system uptime

Catalyst 9200L 48-Port Gigabit Switch

The Cisco Catalyst C9200L-48T-4X-E is a managed Layer 3 switch with 48 Gigabit Ethernet ports and four 10 Gigabit SFP+ uplinks. It supports twisted pair and optical fiber media in a 1U rack-mountable chassis. Redundant power supply capability is included for high-availability deployments.

Network Teams Needing Stackable Layer 3 Access

This switch suits IT teams building stackable access layers that require 48 copper ports and high-speed fiber uplinks for aggregation. Modular uplinks allow media flexibility. Buyers needing Power over Ethernet or PoE+ for phones and cameras should consider other models, as this unit provides data-only ports.

Four 10G SFP+ Uplink Slots

The defining specification is the four SFP+ uplink slots operating at 10 Gigabit speeds. They determine the uplink bandwidth available for stacking or uplink aggregation. Verify that your SFP+ transceivers and cabling match the required 10GBase-X standard before purchase.

Highlights

  • 48 Gigabit Ethernet ports connect many wired devices
  • Four 10 Gigabit SFP+ uplinks provide high-speed aggregation
  • Layer 3 routing enables inter-VLAN traffic control
  • Stacking port allows unified management of multiple units
  • Redundant power supply support increases system uptime

Specifications

BrandCISCO
Series9200
ModelC9200L-48T-4X
FormatRack-mountable
Network Management TypeManaged
Primary Port Speed10GBase-X
10/100/1000Base-T
ProtocolsTCP/IP
Weight11.02 lb
Shipping weight9.57 kg
Package size592 × 480 × 191 mm

Questions about this item

How do I install the C9200L-48T-4X-E in a standard rack and what step is often missed?

Mount the 1.73 in high, 17.52 in wide, 11.34 in deep chassis using the included brackets, then insert SFP+ modules into the four uplink slots before powering on; the step often missed is seating each transceiver until it clicks.

What maintenance or replacement will the C9200L-48T-4X-E need over time?

The hot-swappable power supply and fan tray are the only field-replaceable units; plan to replace the fan tray when airflow noise increases and keep a spare power supply for the redundant slot.

What limit appears first on the C9200L-48T-4X-E during sustained heavy traffic?

The four SFP+ uplink slots provide the only egress path from the 48 Gigabit downlinks, so aggregate uplink capacity is the first constraint under continuous load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.