We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Cisco Systems, Inc.

Cisco Systems, Inc. C9200-24P-E 24-port PoE+ network switch

SKU CH-2TWH-TENR7 MPN C9200-24P-E

A 24-port managed PoE+ switch with four SFP uplinks, Layer 3 routing and 32K MAC entries

  • Switch Type24 Ports Switch
  • FormatRackmount
  • StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.
  • Network Management TypeManaged
  • Primary Ports24 x RJ45 + 4 x SFP
  • Primary Port Speed10/100/1000Mbps + 10 Gbps
  • 24 PoE+ ports power phones and cameras directly
  • Four SFP uplinks at 10 Gbps handle aggregation traffic
  • Layer 3 routing with 32K MAC table scales campus networks
  • StackWise technology joins multiple units into one logical switch
  • Rack-mount 1U chassis fits standard 19-inch cabinets

Catalyst 9200 24-port PoE+ switch

The Cisco Catalyst 9200 C9200-24P-E is a rack-mountable managed switch with 24 RJ45 ports supporting 10/100/1000Mbps speeds and four SFP uplinks at 10 Gbps. It delivers PoE+ power across all copper ports for devices such as access points and IP phones. The unit runs Network Essentials software and supports Cisco StackWise technology for simplified operations.

Suited for managed access layers needing PoE+

This switch fits networks that require Layer 3 routing, MACsec encryption, and advanced features such as Flexible NetFlow and Embedded Event Manager. It is not intended for deployments that need higher port density beyond 24 copper ports or uplink speeds exceeding 10 Gbps. Organisations without in-house Cisco management expertise may find the feature set more complex than necessary.

StackWise and modular uplinks extend flexibility

Built-in StackWise allows multiple units to operate as a single logical device, reducing management overhead. The four SFP uplink slots accept compatible transceivers for fibre or copper uplinks, while the modular design supports future network module upgrades. A 32K MAC address table and 9198-byte jumbo frames handle demanding traffic patterns.

Highlights

  • 24 PoE+ ports power phones and cameras directly
  • Four SFP uplinks at 10 Gbps handle aggregation traffic
  • Layer 3 routing with 32K MAC table scales campus networks
  • StackWise technology joins multiple units into one logical switch
  • Rack-mount 1U chassis fits standard 19-inch cabinets

Specifications

BrandCISCO
SeriesCatalyst 9200
ModelC9200-24P-E
Switch Type24 Ports Switch
FormatRackmount
StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3at, IEEE 802.3bz
Network Management TypeManaged
Primary Ports24 x RJ45 + 4 x SFP
Primary Port Speed10/100/1000Mbps + 10 Gbps
MAC Address Table32K
Jumbo Frames9198 bytes
PoEPoE+
Layer3
Module SupportYes
PowerAC 120/230 V ( 50/60 Hz )
FeaturesCisco StackWise Technology, EIGRP Stub Routing, Flexible NetFlow (FNF), MACsec support, built-in ASIC, Control plane protection (CoPP), Blue Beacon LED, Embedded Event Manager (EEM), Protocol Independent Multicast (PIM), First Hop Security (FHS), PVLAN support, DNA support, Superior QoS
Dimensions1.73" x 17.52" x 13.78"
Weight12.13 lbs.
Shipping weight7.62 kg
Package size540 × 220 × 50 mm

Questions about this item

Does the C9200-24P-E need a specific rack and power circuit to operate?

The switch fits a standard 19-inch rack (1.73 in high, 17.52 in wide, 13.78 in deep) and runs on AC 120/230 V at 50/60 Hz.

Can the four SFP uplinks on this switch connect to older 1 Gbps fibre modules we already own?

The four SFP ports accept 10 Gbps modules and also support legacy 1 Gbps SFP transceivers for existing fibre links.

Which front-panel LEDs confirm the C9200-24P-E is passing PoE+ power and stacking correctly?

Per-port PoE LEDs show powered-device status, the Blue Beacon LED identifies the unit in a rack, and StackWise indicators display stack membership and health.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.