SonicWall
SonicWall 01-SSC-1445 Capture Advanced Threat Protection hardware license
- Capture Advance Thr…
$378.99
0.00455424BTC
In stock
Cisco Systems, Inc.
Cisco Systems, Inc. C1300X-10NU-2X 10-port 5G mGig + 2x10G Layer 3 network switch
Managed Layer 3 switch with 10 5G mGig PoE ports, two 10G uplinks and 385 W power budget
- FormatRackmount
- StandardsIEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Et
- Network Management TypeManaged
- Primary Port TypeTotal system ports: 10 x 5G mGig + 2x10G RJ-45 ports: 10 x 5
- Management Interfaceweb user interface: Built-in switch configuration utility fo
- MAC Address Tableup to 32,000 rules
- 10 x 5G mGig plus 2 x 10G SFP28 uplinks for high-speed connectivity
- 385 W PoE budget powers 10 ports for phones, cameras and access points
- Layer 3 routing with up to 7168 IPv4 routes for network segmentation
- Stack up to 8 units managing 400 ports as a single system
- Browser-based management with simple and advanced modes for easy configuration
10-port 5G mGig Layer 3 switch
The Cisco C1300X-10NU-2X is a managed rackmount switch built for small and medium businesses or branch offices that need enterprise-class Layer 3 routing and 10 ports of 5G mGig connectivity. It delivers wire-speed IPv4 and IPv6 routing with up to 7168 routes and 256 IP interfaces.
Stacking and PoE budget
The switch supports stacking up to 8 units for a single logical system of up to 400 ports with hardware failover, while cross-stacking with other families is not supported. Its 385 W PoE budget powers all 10 mGig ports simultaneously for access points, cameras or phones.
104.16 mpps forwarding rate
A packet forwarding rate of 104.16 million packets per second at 64-byte frames determines whether this switch can sustain line-rate traffic across all 10 multi-gigabit ports and two 10 Gbps uplinks under peak load.
Highlights
- 10 x 5G mGig plus 2 x 10G SFP28 uplinks for high-speed connectivity
- 385 W PoE budget powers 10 ports for phones, cameras and access points
- Layer 3 routing with up to 7168 IPv4 routes for network segmentation
- Stack up to 8 units managing 400 ports as a single system
- Browser-based management with simple and advanced modes for easy configuration
Specifications
| Brand | Cisco Systems, Inc. |
|---|---|
| Series | C1300X Series |
| Model | C1300X-10NU-2X |
| Part Number | C1300X-10NU-2X |
| Format | Rackmount |
| Standards | IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3ad Link Aggregation Control Protocol, IEEE 802.3z Gigabit Ethernet, IEEE 802.3ae 10 Gbps Ethernet over fiber for LAN, IEEE 802.3an 10GBASE-T 10 Gbps Ethernet over copper twisted pair cable, IEEE 802.3x Flow Control, IEEE 802.1D (STP, GARP, and GVRP), IEEE 802.1Q/p VLAN, IEEE 802.1w Rapid STP, IEEE 802.1s Multiple STP, IEEE 802.1X Port Access Authentication, IEEE 802.3af, IEEE 802.3at, IEEE 802.1AB Link Layer Discovery Protocol, IEEE 802.3az Energy Efficient Ethernet |
| Network Management Type | Managed |
| Primary Port Type | Total system ports: 10 x 5G mGig + 2x10G RJ-45 ports: 10 x 5G mGig Combo ports (RJ-45 + Small Form-Factor Pluggable [SFP]): 2 x SFP28(10G Uplink, 25G available for stacking only) |
| Management Interface | web user interface: Built-in switch configuration utility for easy browser-based device configuration (HTTP/HTTPS). Supports simple and advanced mode, configuration, wizards, customizable dashboard, system maintenance, monitoring, online help, and universal search. |
| MAC Address Table | up to 32,000 rules |
| Jumbo Frames | Frame sizes up to 9000 bytes. The default MTU is 2000 bytes |
| Packet Forwarding Rate | Packet buffer: 3 MB Capacity in Millions of Packets Per Second (mpps) (64-byte packets): 104.16 |
| PoE | Yes |
| Stackable | Supports up to 8 switches in a stack. Up to 400 ports managed as a single system with hardware failover. PIDs from the same Family can be stacked together. Cross-stacking between Families is not supported. |
| QoS | Priority levels: 8 hardware queues Scheduling: Strict priority and Weighted Round-Robin (WRR) Class of Service: Port-based, 802.1p VLAN priority-based, IPv4/IPv6 IP precedence/Type of Service (ToS)/DSCP-based, Differentiated Services (DiffServ), classification and remarking ACLs, trusted QoS Queue assignment based on DSCP and Class of Service (802.1p/CoS) Rate limiting: Ingress policer; egress shaping and rate control per VLAN, per port, and flow based; dualrate 3-color (2R3C) policing Congestion avoidance: A TCP congestion avoidance algorithm is required to minimize and prevent glob |
| Layer | 3 |
| Layer 2 Features | Spanning Tree Protocol: Standard 802.1d Spanning Tree support Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default Multiple Spanning Tree instances using 802.1s (MSTP); 16 instances are supported. Per-VLAN Spanning Tree Plus (PVST+) and Rapid PVST+ (RPVST+); 126 instances are supported Port grouping/link aggregation: Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP) Up to 8 groups Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation VLAN: Support for up to 4094 VLANs (4078 – 4094 are for internal usage) |
| Layer 3 Features | IPv4 routing: Wire-speed routing of IPv4 packets. Up to 7168 (Dynamic + Static) IPv4 routes and up to 256 IP interfaces IPv6 routing: Wire-speed routing of IPv6 packets Layer 3 interface: Configuration of a Layer 3 interface on a physical port, LAG, VLAN interface, or loopback interface Classless Interdomain Routing (CIDR): Support for CIDR Routing Information Protocol (RIP) v2: Support for RIP v2 for dynamic routing Policy-Based Routing (PBR): Flexible routing control to direct packets to a different next hop based on an IPv4 or IPv6 Access Control List (ACL) Open Shortest Path Firs |
| PoE Ports | 10 x PoE |
| PoE Power Budget | 385W |
| Power | 100-240V 50-60 Hz, internal, universal |
| Max Power Consumption | System power consumption 110V=51.9W 220V=52.5W Power consumption (with PoE) 110V=453.2W 220V=442.2W |
| Dimensions | 268 x 308 x 43.94 mm (10.55 x 12.13 x 1.73 in) |
| Weight | 3.03kg (6.68lb) |
| Certification | UL (UL 62368), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A |
| Shipping weight | 5.08 kg |
| Package size | 472 × 358 × 117 mm |
Questions about this item
When will the 385 W PoE budget need to be re-evaluated if I add more powered devices?
The switch provides a 385 W PoE budget across its 10 PoE ports; adding devices that push total draw beyond that limit will require a second switch or a higher-capacity model.
What throughput ceiling appears first when all 10 mGig ports run at line rate continuously?
The packet-forwarding engine is rated at 104.16 Mpps with 64-byte frames and a 3 MB buffer, so sustained wire-rate traffic on all ports will hit that forwarding limit before the 10 G uplinks saturate.
How loud are the fans when the switch operates at full PoE load in a rack all day?
Fan speed ramps with internal temperature; under continuous 385 W PoE load the fans run at higher RPM, producing noticeable airflow noise typical of rack-mount switches in a server room.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SonicWall
SonicWall 01-SSC-1435 Capture Advanced Threat Protection hardware license
- Capture Advance Thr…
$357.99
0.00430189BTC
In stock
