We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rack-mount switch with 16 RJ45 ports and 2 SFP slots

Cisco Systems, Inc.

Cisco Systems, Inc. C1200-16T-2G network switch 16 RJ45 2 SFP

SKU CH-7ZCT-YQYVX MPN C1200-16T-2G

Managed 16-port Gigabit Ethernet switch with two SFP uplinks and fanless Layer 3 operation

  • Switch TypeEthernet Switch
  • Network Media1000Base-X 10/100/1000Base-T
  • Network Management TypeManaged
  • Uplink InterfaceRJ45
  • Primary Ports16 x RJ45 + 2 x SFP
  • PoENo
  • 16 RJ45 ports plus 2 SFP uplinks for flexible connectivity
  • Layer 3 managed switching enables advanced routing and segmentation
  • Fanless design ensures silent operation in noise-sensitive spaces
  • 37 W maximum power draw keeps energy costs low
  • 100–240 VAC input supports global deployment without adapters

16-Port Gigabit Switch with SFP Uplinks

The Cisco Catalyst C1200-16T-2G is a managed Ethernet switch built for small business networks. It provides sixteen RJ45 ports running at 10/100/1000Base-T speeds. Two additional SFP slots accept 1000Base-X modules for fibre uplinks. The unit operates silently with a fanless design and consumes a maximum of 18.37 W.

Suits Managed Layer 3 Needs; Not for PoE Devices

This switch fits administrators who require Layer 3 routing features and a web or CLI management interface. It supports VLANs, QoS and static routing for traffic segmentation. Buyers needing Power over Ethernet for phones or cameras must select a different model. Networks requiring higher port density or 10G uplinks should also consider other options.

Layer 3 Routing Decides Fit

The defining specification is Layer 3 support, which enables inter-VLAN routing without a separate router. If your design only needs basic switching, an unmanaged or Layer 2 device will cost less. Confirm that your fibre modules match the 1000Base-X standard for the SFP ports. The 100-240VAC input works worldwide without configuration.

Highlights

  • 16 RJ45 ports plus 2 SFP uplinks for flexible connectivity
  • Layer 3 managed switching enables advanced routing and segmentation
  • Fanless design ensures silent operation in noise-sensitive spaces
  • 37 W maximum power draw keeps energy costs low
  • 100–240 VAC input supports global deployment without adapters

Specifications

BrandCISCO
Series1200
ModelC1200-16T-2G
Part NumberC120016T2G
Switch TypeEthernet Switch
Network Media1000Base-X
10/100/1000Base-T
Network Management TypeManaged
Uplink InterfaceRJ45
Primary Ports16 x RJ45 + 2 x SFP
PoENo
Layer3
Power100~240VAC, 50/60Hz
Max Power Consumption18.37 W
FeaturesFanless
Shipping weight3.72 kg
Package size409 × 399 × 107 mm

Questions about this item

How much heat and noise will the 18.37 W fanless C1200-16T-2G produce running 24/7?

The switch draws a maximum of 18.37 W and uses a fanless design, so it runs silently with only modest heat output suitable for a desk or rack shelf.

What cabling and SFP modules do I need to use the 16 RJ45 and 2 SFP ports on this switch?

Connect devices with Cat5e or better copper cables to the 16 RJ45 ports and insert compatible 1000Base-X SFP transceivers with fibre patch leads for the two SFP uplinks.

Will the Layer 3 C1200-16T-2G interoperate with my older 10/100 switches and routers?

Yes, the RJ45 ports auto-negotiate 10, 100 or 1000 Mbps and the Layer 3 routing features work with legacy equipment using standard Ethernet and IP protocols.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.