We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular 60W PoE injector, 12.63 by 5.9 by 2.8 inches

Cisco Systems, Inc.

Cisco Systems, Inc. AIR-PWRINJ-60RGD1= 60W PoE Injector

SKU CH-5805-DJK10 MPN AIR-PWRINJ-60RGD1=

A 60 W outdoor PoE injector that combines 55 VDC power with data on all four pairs of shielded CAT5e cable up to 320 ft for Cisco Aironet access points

  • ColorWhite
  • Dimensions12.63 in x 5.9 in x 2.8 in
  • Weight0 kilograms
  • Delivers 60 W over four wire pairs for outdoor access points
  • Combines 55 VDC power with data on a single Ethernet cable
  • Supports shielded outdoor CAT5e cable up to 320 ft (100 m)
  • Accepts 26 AWG wire gauge with 0.20–0.35 in diameter
  • Compact 12.63 × 5.9 × 2.8 in form factor for rugged installs

Deployment Flexibility

The Cisco Aironet 60W PoE injector combines 55-VDC power with data on a single outdoor-rated Ethernet cable, extending wireless LAN placement options where AC outlets are unavailable. It delivers up to 60 W across all four wire pairs to compatible access points. The unit accepts a shielded CAT5e or higher link from a 10/100/1000 switch and passes both power and data to the AP. Total cable run from the access point to the switch must not exceed 320 ft.

Ruggedised Construction

A white enclosure measuring 12.63 in by 5.9 in by 2.8 in is built for outdoor mounting, eliminating the need for a separate weatherproof housing. The injector requires shielded outdoor-rated CAT5e or better cable with a 0.20 to 0.35 inch diameter on the AP side, and a shielded CAT5e or higher cable on the switch side. Cable gauge must be 26 AWG to meet the specified distance limit. No other cable types are supported.

Ready-to-Install Kit

The package includes the power injector itself, an internal 55-VDC supply, and mounting hardware for pole or wall attachment, so installers can deploy immediately without sourcing separate brackets. There is no management software or licence bundled; configuration is handled entirely on the connected access point and switch. Buyers who need indoor-only injection or lower power budgets should verify those requirements before purchase.

Highlights

  • Delivers 60 W over four wire pairs for outdoor access points
  • Combines 55 VDC power with data on a single Ethernet cable
  • Supports shielded outdoor CAT5e cable up to 320 ft (100 m)
  • Accepts 26 AWG wire gauge with 0.20–0.35 in diameter
  • Compact 12.63 × 5.9 × 2.8 in form factor for rugged installs

Specifications

BrandCISCO
Part NumberAIR-PWRINJ-60RGD1
ColorWhite
Dimensions12.63 in x 5.9 in x 2.8 in
Weight0 kilograms
Shipping weight1.53 kg
Package size406 × 305 × 254 mm

Questions about this item

What Ethernet standard does the AIR-PWRINJ-60RGD1= support and what is the practical cable-length limit?

It works with 10/100/1000 Ethernet and the total run from the access point to the switch must not exceed 320 ft (100 m).

What are the mounting dimensions and cable-diameter range for the AIR-PWRINJ-60RGD1=?

The unit measures 12.63 in x 5.9 in x 2.8 in and accepts shielded outdoor-rated CAT5e or higher cable with a 0.20 to 0.35 inch diameter.

How is the AIR-PWRINJ-60RGD1= installed and what wiring mistake do installers often make?

Connect a shielded CAT5e or higher cable from the switch to the injector, then a shielded outdoor-rated CAT5e or higher cable (26 AWG, 0.20–0.35 in diameter) from the injector to the AP; the common error is using unshielded or indoor-rated cable on the AP side.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.