We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rackmount network switch with forty-eight RJ45 ports and four SFP slots

Cisco Meraki

Cisco Meraki MS130-48P-HW 48-port PoE network switch 740W

SKU CH-4DX7-2C9AK MPN MS130-48P-HW

A rack-mount Layer 2 managed switch with 48 Gigabit RJ45 ports, four SFP uplinks and a 740 W PoE budget for powering access points, cameras and phones

  • FormatRackmount
  • Network Management TypeManaged
  • Primary Ports48 x RJ45 + 4 x SFP
  • PoEYes
  • Layer2
  • PoE Power BudgetPoE Type: 802.3bt PoE Port Budget: 802.3bt PoE Switch Budget

Model MS130-48P-HW

  • Cloud-managed Layer 2 switch simplifies deployment with zero-touch provisioning
  • 48 Gigabit RJ45 ports plus 4 SFP uplinks connect devices and uplinks
  • 740 W PoE budget powers phones, cameras and access points
  • 1 U rackmount form factor fits standard cabinets at 4.4 cm height
  • Fixed internal 100-240 V supply runs idle at 49 W and peaks at 803 W

Cloud-Managed 48-Port PoE Switch

The Cisco Meraki MS130-48P-HW is a 1U rackmount Layer 2 switch with 48 RJ45 Gigabit ports and four 1G SFP uplinks. It delivers 740 W of PoE power under the 802.3bt standard and is administered entirely through the Meraki cloud dashboard.

Suited for Centralised PoE Rollouts

Organisations that want zero-touch provisioning, network-wide visibility and remote troubleshooting across distributed sites will benefit. Buyers who need Layer 3 routing, higher-density 10 GbE uplinks or a non-cloud management option should evaluate other platforms.

Deciding Spec: 740 W PoE Budget

The 740 W PoE budget determines how many 802.3bt devices such as access points, cameras or phones can be powered simultaneously. Calculate total device draw against this figure to confirm the switch meets the deployment’s power requirements.

Highlights

  • Cloud-managed Layer 2 switch simplifies deployment with zero-touch provisioning
  • 48 Gigabit RJ45 ports plus 4 SFP uplinks connect devices and uplinks
  • 740 W PoE budget powers phones, cameras and access points
  • 1 U rackmount form factor fits standard cabinets at 4.4 cm height
  • Fixed internal 100-240 V supply runs idle at 49 W and peaks at 803 W

Specifications

BrandCisco Meraki
SeriesMeraki MS130-48
ModelMS130-48P-HW
Part NumberMS130-48P-HW
FormatRackmount
Network Management TypeManaged
Primary Ports48 x RJ45 + 4 x SFP
PoEYes
Layer2
PoE Power BudgetPoE Type: 802.3bt
PoE Port Budget: 802.3bt
PoE Switch Budget: 740W
PowerPower Input: 100-240V~, 12-6A, 50-60Hz
Power Supply: Fixed Internal
Max Power ConsumptionPower Load (idle/max): 49W/803W
Dimensions1.73 x 17.32 x 13.4in
(4.4 x 44 x 34cm)
Weight12.13 lb (5.5 kg
Shipping weight5.67 kg
Package size457 × 305 × 127 mm

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I choose the 48-port PoE model or a non-PoE variant?

This model provides 48 RJ45 ports with 802.3bt PoE and a 740 W total budget, plus 4 SFP uplinks; a non-PoE variant would remove the 740 W power budget and 802.3bt support.

What does the 740 W PoE budget deliver in a live rack?

It powers all 48 ports at up to 802.3bt levels simultaneously, with the switch drawing 49 W idle and up to 803 W at full load.

How do the 4 SFP uplinks and 802.3bt PoE type constrain my design?

The four 1 GbE SFP ports handle uplinks while every RJ45 port supports 802.3bt, so total PoE draw across all 48 ports cannot exceed 740 W.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.