We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact white rectangular wall-mounted electric tankless water heater with inlet and outlet connections visible

Chronomite

Chronomite SR-15L/120 HTR-I Instant-Flow Electric Tankless Water Heater

SKU CH-XAPM-PX9EX

Instant-Flow electric tankless heater provides 1.5 gpm at 120 V for commercial or residential hand-washing sinks

  • TypeOther
  • Instant hot water at 1.5 gpm maximum flow rate
  • Activates at low 0.35 gpm for faucet efficiency
  • Compact 6.25 x 9.63 x 2.75 in fits tight spaces
  • 1,800 W at 120 V draws only 15 A
  • Delivers 140–160 °F for commercial hand-washing

Compact Electric Tankless Heater

The Chronomite SR-15L/120 HTR-I is a wall-mounted electric tankless water heater designed for indoor use in commercial and residential settings. It delivers hot water on demand for hospitality sinks and manual hand-washing faucets without the footprint of a storage tank.

Suits Low-Flow Hand-Washing Points

This unit suits installations needing a maximum flow of 1.5 gpm activated from 0.35 gpm, delivering temperatures between 140 and 160 degrees F. It is not for high-volume fixtures, multi-outlet supply, or sites lacking a dedicated 15 A circuit at 120 V AC.

15 Amp Single-Phase Power Draw

The heater operates on a single-phase 120 V AC supply drawing 15 A for a 1,800 W power consumption. This electrical requirement is the primary constraint; verify the branch circuit capacity before purchase.

Highlights

  • Instant hot water at 1.5 gpm maximum flow rate
  • Activates at low 0.35 gpm for faucet efficiency
  • Compact 6.25 x 9.63 x 2.75 in fits tight spaces
  • 1,800 W at 120 V draws only 15 A
  • Delivers 140–160 °F for commercial hand-washing

Specifications

BrandCHRONOMITE LABS
TypeOther

Questions about this item

What wall space and cold-water inlet does the 6.25 in high by 9.63 in wide unit require?

The heater measures 6.25 in tall, 9.63 in wide and 2.75 in deep, and connects to a 3/8 in cold inlet. No adjustable thermostat is fitted.

Which electrical circuit and flow rate must be present before the 15 A heater will activate?

Provide a 120 V AC single-phase circuit rated for 15 A and 1,800 W, then open the tap to at least .35 gpm; the unit starts instantly and delivers up to 1.5 gpm.

How often should the inlet screen be cleaned to maintain the 1.5 gpm maximum flow?

Inspect and clean the inlet screen every six months, or sooner if flow drops below 1.5 gpm, to prevent debris from restricting the .35 gpm activation threshold.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.