Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00933145BTC
In stock
Chronomite Instant-Flow Micro
Chronomite Instant-Flow Micro CM-15L/277 110F Undersink water heater
Electric tankless heater delivers 110 °F to 160 °F water at up to 1 gpm from a 277 V supply
- TypeWater Heaters
- Instant hot water at 110 °F minimum delivered temperature
- Compact 6.25 in high design fits tight undersink spaces
- Single-phase 277 V AC operation suits commercial and residential installs
- Activates at just 0.2 gpm for low-flow efficiency
- 4,150 W heating element delivers up to 1 gpm flow
Undersink 277 V tankless heater
The Chronomite CM-15L/277 110F is an electric tankless water heater designed for undersink installation in commercial and residential settings. It operates on a 277 V AC single-phase supply and delivers hot water on demand without a storage tank.
Installation and activation
The unit measures 6.25 in high, 9.63 in wide and 2.75 in deep with a 3/8 in cold inlet, allowing it to fit in tight cabinet spaces. It requires a minimum flow of 0.2 gpm to activate, so very low-flow fixtures may not trigger heating. A 15 A circuit is needed to support the 4,150 W power draw.
Temperature and flow limits
The heater provides a maximum flow rate of 1 gpm with outlet temperatures fixed between 110 °F and 160 °F. The thermostat is not adjustable, so the temperature range cannot be altered on site. It is intended for indoor use only and carries a California Proposition 65 warning for chemicals known to cause cancer and reproductive harm.
Highlights
- Instant hot water at 110 °F minimum delivered temperature
- Compact 6.25 in high design fits tight undersink spaces
- Single-phase 277 V AC operation suits commercial and residential installs
- Activates at just 0.2 gpm for low-flow efficiency
- 4,150 W heating element delivers up to 1 gpm flow
Specifications
| Brand | CHRONOMITE |
|---|---|
| Type | Water Heaters |
Questions about this item
How can I confirm the heater is operating correctly once installed?
Verify that water reaches the set 110 °F minimum or up to 160 °F maximum at the tap and that the unit draws the rated 15 A at 277 V AC when flow exceeds 0.2 gpm.
What comes in the box and what must I supply separately?
The heater itself is included; you must provide a 277 V AC single-phase circuit rated for 15 A, 3/8 in cold-water supply fittings and a suitable indoor mounting location.
Which voltage and temperature version should I select for a commercial hand-wash station?
Choose the 277 V AC model with a 110 °F to 160 °F delivery range and 1 gpm maximum flow to match typical undersink commercial requirements.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
