Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.0094039BTC
In stock
Chronomite Instant-Flow Micro
Chronomite Instant-Flow Micro CM-12L/240 110F Undersink water heater part
Undersink electric tankless heater delivering 1 gpm at 110 °F from a 240 V, 2,880 W unit measuring 9.63 × 6.25 × 2.75 in
- TypeWater Heaters
- Instant hot water at 110 °F delivered on demand
- Compact 2.75 × 6.25 × 9.63 in design fits under any sink
- 240 V single-phase operation draws only 12 A at 2 880 W
- Activates at just .2 gpm for low-flow efficiency
- 3/8 in compression inlet with 14 AWG cord simplifies installation
Compact Undersink Tankless Heater
The Chronomite CM-12L/240 110F is a compact electric tankless water heater designed for undersink installation. It delivers hot water on demand at a fixed 110°F temperature for commercial and residential use.
Suits Single Fixtures Only
This unit suits a single sink needing 1 gpm flow with 0.2 gpm activation. It is not for buyers who need adjustable temperature, higher flow rates, or supply for multiple outlets simultaneously.
Fixed 110°F Output Temperature
The heater provides a non-adjustable maximum and minimum delivered temperature of 110°F. Verify this fixed setpoint matches the exact requirement for the intended application before purchase.
Highlights
- Instant hot water at 110 °F delivered on demand
- Compact 2.75 × 6.25 × 9.63 in design fits under any sink
- 240 V single-phase operation draws only 12 A at 2 880 W
- Activates at just .2 gpm for low-flow efficiency
- 3/8 in compression inlet with 14 AWG cord simplifies installation
Specifications
| Brand | CHRONOMITE |
|---|---|
| Type | Water Heaters |
Questions about this item
How do I install the CM-12L/240 110F undersink heater and what step is often missed?
Mount the unit indoors, connect the 3/8 in compression cold inlet, and wire the 14 AWG cord to a 240V AC single-phase supply with a 12 A breaker; the step often missed is confirming the circuit can deliver 2,880 W continuously.
What maintenance or replacement will the CM-12L/240 110F need over time?
The fixed 110 °F output means the heating element and flow sensor are the primary wear items; plan to descale the heat exchanger annually and replace the element if temperature drops or flow activation fails at 0.2 gpm.
What limit appears first when the CM-12L/240 110F runs continuously?
The 1 gpm maximum flow rate is the first constraint; sustained demand above that will drop outlet temperature below the fixed 110 °F set point even though the 2,880 W element remains powered.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
