Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00937381BTC
In stock
Chronomite Instant-Flow Micro
Chronomite Instant-Flow Micro CM-12L/120 110F water heater part
Compact electric tankless heater delivers 110 °F water at 1 GPM from a 120 V supply
- TypeWater Heaters
- Delivers instant hot water at 110 °F with a 1 gpm maximum flow rate
- Activates at a low 0.2 gpm for efficient point-of-use operation
- Compact 9.63 × 6.25 × 2.75 in design fits easily under sinks
- Runs on standard 120 V AC single-phase power drawing 12 A
- Pre-wired with 14 AWG cord and 3/8 in compression inlet for simple installation
Undersink electric tankless heater
The Chronomite CM-12L/120 110F is a compact electric tankless water heater designed for undersink installation in commercial and residential settings. It operates on 120V AC single-phase power and draws 12 A with a power consumption of 1,440 W. The unit delivers water at a fixed temperature of 110 Degrees F.
Suits point-of-use hot water needs
This heater suits applications requiring a maximum flow rate of 1 gpm with a minimum activation flow of .2 gpm. It is not for buyers who need adjustable temperature settings or higher flow rates for multiple fixtures. Installations requiring a different inlet connection than 3/8 in compression should look at something else.
Fixed temperature simplifies installation
The non-adjustable thermostat removes the need for user calibration and delivers consistent 110 Degrees F output. A 14 AWG cord is included for electrical connection. The small footprint of 9.63 in wide, 6.25 in high, and 2.75 in deep allows fitment in tight cabinet spaces. California Proposition 65 warnings apply.
Highlights
- Delivers instant hot water at 110 °F with a 1 gpm maximum flow rate
- Activates at a low 0.2 gpm for efficient point-of-use operation
- Compact 9.63 × 6.25 × 2.75 in design fits easily under sinks
- Runs on standard 120 V AC single-phase power drawing 12 A
- Pre-wired with 14 AWG cord and 3/8 in compression inlet for simple installation
Specifications
| Brand | CHRONOMITE |
|---|---|
| Type | Water Heaters |
Questions about this item
What electrical supply does the CM-12L/120 110F need to operate?
The unit requires a 120V AC single-phase circuit capable of delivering 12 A, with a 14 AWG cord supplied for connection.
Can I keep my existing 3/8 in compression cold-water line when installing this heater?
Yes, the cold inlet is a 3/8 in compression fitting, so your current supply line can connect directly without adapters.
How do I confirm the heater is delivering water at the correct temperature after installation?
Run the tap until flow exceeds 0.2 gpm; the outlet should stabilise at 110 °F, the factory-set maximum and minimum delivered temperature.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
