CHRISTIE
CHRISTIE POA-LMP116 330W projector lamp
A 330W replacement projector lamp module with a 2,000 to 3,000 hour rated life, supplied fully assembled for direct installation
- TypeProjector Lamp
- Wattage330W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Bright 330W output powers clear projection
- Up to 3,000 hours lamp life in Economy mode
- 2,000 hours rated life under Normal operation
- NSH bulb technology ensures reliable ignition
- Fully assembled housing enables quick installation
Ready-to-install projector lamp
This Christie POA-LMP116 module delivers a new 330 W NSH bulb inside a complete housing so it fits straight into the projector without extra assembly. The unit is manufactured to ISO 9001 quality checks covering ignition, voltage, beam performance and run-time. It replaces the Panasonic ET-SLMP116 lamp used in compatible Christie projectors.
Suited for Christie projector owners
The lamp serves users who need a direct replacement with the original 330 W rating and a rated life of 2 000 hours in normal mode or 3 000 hours in economy mode. It is not for buyers who require a different wattage, a bare bulb without housing, or a lamp built for another projector brand or model series.
330 W NSH bulb with dual-mode life
The single specification that decides fitment is the 330 watt NSH bulb rated for 2 000 hours normal and 3 000 hours economy operation. Match this wattage and life rating to the projector's service manual before ordering.
Highlights
- Bright 330W output powers clear projection
- Up to 3,000 hours lamp life in Economy mode
- 2,000 hours rated life under Normal operation
- NSH bulb technology ensures reliable ignition
- Fully assembled housing enables quick installation
Specifications
| Brand | Christie |
|---|---|
| Type | Projector Lamp |
| Wattage | 330W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
What Christie projector models accept the POA-LMP116 330W lamp module?
This module replaces the Panasonic ET-SLMP116 and fits Christie projectors that use that part number.
Which step do installers most often skip when fitting the POA-LMP116 lamp?
They forget to reset the projector's lamp-hour counter after installing the new 330W module, so the unit still warns of end-of-life.
When should the NSH 330W bulb inside the POA-LMP116 be replaced?
Plan replacement after 2,000 hours in normal mode or 3,000 hours in economy mode, when brightness drops below usable levels.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



