CHRISTIE
CHRISTIE LX900 Projector Lamp 330W 2000 Hrs
A ready-to-install 330 W lamp module rated for 2,000 hours of projection time
- TypeProjector Lamp
- Wattage330W
- Lamp Life2,000 Hrs.
- 330 W Ushio NSH bulb delivers bright projection
- 2 000-hour rated lamp life supports extended use
- Fully assembled module enables quick installation
- Genuine OEM components ensure reliable compatibility
- ISO 9001 manufacturing standards verify consistent quality
Christie LX900 Replacement Lamp Module
This new 330 W lamp module is built for Christie LX900 projectors. It arrives as a complete bulb-and-housing assembly so you can install it without handling the bare lamp. The unit uses a genuine Ushio NSH bulb rated for 2,000 hours of operation.
Replaces Worn Original Lamp In LX900
Swap this module when the existing lamp reaches its rated life or when brightness and colour uniformity drop below usable levels. The jump is worth it if the projector is still mechanically sound and you need another 2,000-hour cycle before considering a full projector replacement.
Verify Projector Model And Lamp Code First
Confirm the projector is a Christie LX900 and that the service menu shows lamp code POA-LMP104 before ordering. Check that the housing style matches the one currently installed, as multiple OEM versions exist for this model. Ensure the projector’s lamp timer can be reset after installation.
Highlights
- 330 W Ushio NSH bulb delivers bright projection
- 2 000-hour rated lamp life supports extended use
- Fully assembled module enables quick installation
- Genuine OEM components ensure reliable compatibility
- ISO 9001 manufacturing standards verify consistent quality
Specifications
| Brand | Christie |
|---|---|
| Type | Projector Lamp |
| Wattage | 330W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
Does the POA-LMP104 module include the housing so it fits the Christie LX900 without extra parts?
Yes, the lamp module is a fully assembled bulb and housing designed to fit the Christie LX900 projector directly.
What is the correct way to install the NSH 330W lamp and which step is often missed?
Power off and cool the projector, open the lamp door, remove the old module, insert the new POA-LMP104 until it seats firmly, close the door, then reset the lamp timer in the menu — skipping the timer reset is the common mistake.
When will the 330W NSH bulb need replacement based on its rated life?
The lamp is rated for 2,000 hours of operation; plan replacement when the projector's hour counter approaches that figure or image brightness noticeably drops.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



