CHRISTIE
Christie LX1000 POA-LMP128 330W projector lamp
A 330W replacement lamp module with a Ushio NSHA bulb and housing, rated for 2,000 normal or 3,000 economy hours
- TypeProjector Lamp
- Wattage330W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Ready-to-install module saves setup time
- 330W Ushio NSHA bulb delivers rated brightness
- 2000-hour normal life reduces replacement frequency
- 3000-hour economy mode extends operating interval
- ISO 9001 manufacturing ensures consistent quality
Ready-fit module for Christie LX1000
The Christie POA-LMP128 lamp module delivers a pre-assembled 330W Ushio NSHA bulb inside its housing. It is designed for direct installation in Christie LX1000 projectors without separate bulb handling. The unit ships new and passes ISO 9001 quality checks for ignition, voltage and run-time.
Rated output and service intervals
The lamp runs at 330W and provides 2000 hours in normal mode or 3000 hours in economy mode. Brightness will gradually decline as those limits approach, so plan replacement before critical presentations. No higher-wattage or longer-life alternative is offered for this chassis.
Replaces bare-bulb swaps and older modules
This module removes the need to align a bare NSHA bulb in the existing cage, cutting installation time and reducing dust risk. The upgrade is worth it when the current lamp has reached its rated hours or shows colour shift, but it does not increase native resolution or add networking features.
Highlights
- Ready-to-install module saves setup time
- 330W Ushio NSHA bulb delivers rated brightness
- 2000-hour normal life reduces replacement frequency
- 3000-hour economy mode extends operating interval
- ISO 9001 manufacturing ensures consistent quality
Specifications
| Brand | Christie |
|---|---|
| Type | Projector Lamp |
| Wattage | 330W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
Which Christie LX1000 POA-LMP128 lamp version should I choose among the OEM and compatible options?
Three OEM versions exist — the original bulb maker's lamp, Christie's own OEM lamp, and an OEM-compatible from a different bulb manufacturer — plus an economical compatible built with genuine OEM parts; all meet ISO 9001 checks for beam performance, ignition, voltage, connections and run-time.
What does the 330W rating mean for brightness and heat in my Christie projector?
The 330W NSHA bulb delivers the light output the LX1000 was designed for; expect the same lumen level as the original lamp and plan for the projector's standard cooling to handle the heat load.
Does the POA-LMP128 use a special connector or standard projector-lamp interface?
It ships as a complete bulb-and-housing module that plugs directly into the Christie LX1000 socket; no extra adapters or wiring changes are required for installation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



