CHRISTIE
CHRISTIE DHD600-G Projector Lamp 465W 2000 Hrs
A 465 W replacement lamp module with a 2,000-hour rated life, supplied as a complete bulb-and-housing assembly for Christie projectors
- TypeProjector Lamp
- Wattage465W
- Lamp Life2,000 Hrs.
- Ready-to-install module saves setup time
- 465W Ushio P-VIP bulb delivers specified brightness
- 2,000-hour rated life supports extended use
- Manufactured to ISO 9001 quality standards
- Direct OEM replacement ensures projector compatibility
Ready-to-install projector lamp module
The Christie DHD600-G lamp ships as a fully assembled 465W Ushio P-VIP bulb inside its housing, so technicians can swap it without handling bare glass. It matches Christie part number 003-004808-01 and is built to ISO 9001 quality checks for beam performance, ignition voltage and run-time. Three OEM variants and one compatible version are stocked depending on supply.
Thermals, noise and power
The lamp draws 465 W during operation and is rated for 2,000 hours of service life under normal projector cooling. Acoustic output and thermal load are governed by the host projector’s fan design rather than the lamp itself. No separate power supply or ballast replacement is required when installing this module.
Deciding specification: 465 W lamp power
The 465 W rating determines whether this module fits the projector’s electrical and thermal envelope; a different wattage will not strike or will overheat the chassis. Buyers who need a lower or higher wattage lamp for another Christie model must select the matching part instead.
Highlights
- Ready-to-install module saves setup time
- 465W Ushio P-VIP bulb delivers specified brightness
- 2,000-hour rated life supports extended use
- Manufactured to ISO 9001 quality standards
- Direct OEM replacement ensures projector compatibility
Specifications
| Brand | Christie |
|---|---|
| Type | Projector Lamp |
| Wattage | 465W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
How do I install the Christie DHD600-G lamp module, and what step do people often miss?
The module arrives as a fully assembled bulb and housing. The step people miss is resetting the projector's lamp-hour counter after fitting the new unit, otherwise the timer still reads the old 2,000 Hrs.
What maintenance or replacement will this lamp need later?
After roughly 2,000 Hrs. of operation the 465W Ushio P-VIP bulb reaches end of life and the entire module must be swapped for a new one.
What limit appears first during sustained use of this 465W lamp?
The rated 2,000 Hrs. lamp life is the first hard limit; beyond that brightness drops and ignition becomes unreliable.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



