CHRISTIE
CHRISTIE 03-900471-01P 200W projector lamp
A 200W replacement projector lamp module with a 1,500-hour rated life, supplied as a complete housing for direct installation
- TypeProjector Lamp
- Wattage200W
- Lamp Life1,500 Hrs.
- Ready to install with pre-assembled bulb and housing
- 200W UHP lamp delivers 1,500 hours of projection time
- OEM-sourced from Philips Osram Ushio Phoenix Iwasaki Matsushita
- Built to ISO9001 quality standards for reliable performance
- New condition ensures full rated lamp life from day one
Ready-to-install projector lamp module
This Christie 03-900471-01P replacement lamp arrives as a fully assembled 200W bulb and housing unit, eliminating the need for manual alignment during installation. It is designed for technicians and venue operators who need a direct swap that restores full brightness without specialised tools or calibration steps. ||
200W UHP lamp thermal and power profile
The lamp draws 200W during normal operation, a figure that determines both the projector's power budget and the cooling airflow required to maintain stable output. Heat and acoustic performance follow the host projector's own fan curves and duct design rather than any independent specification. ||
1,500-hour rated life under sustained use
Rated lamp life is 1,500 hours when the projector runs continuously within its specified environmental limits, a figure derived from standardised ignition and run-time testing. Actual longevity will vary with duty cycle, ambient temperature and the frequency of cold starts, so venues with heavy daily schedules should plan replacements accordingly.
Highlights
- Ready to install with pre-assembled bulb and housing
- 200W UHP lamp delivers 1,500 hours of projection time
- OEM-sourced from Philips Osram Ushio Phoenix Iwasaki Matsushita
- Built to ISO9001 quality standards for reliable performance
- New condition ensures full rated lamp life from day one
Specifications
| Brand | Christie |
|---|---|
| Type | Projector Lamp |
| Wattage | 200W |
| Lamp Life | 1,500 Hrs. |
Questions about this item
How do I install the Christie 03-900471-01P lamp module, and what step is often missed?
Power off and unplug the projector, let it cool completely, then remove the lamp cover and swap the module; the step people skip is resetting the lamp-hour counter in the menu after fitting the new unit.
What maintenance or replacement will the 200W UHP lamp need later?
The lamp is rated for 1,500 hours of use; once that limit is reached you replace the entire module — no separate filter or bulb-only change is required.
What limit appears first during sustained operation of this 200W lamp?
The 1,500-hour rated life is the primary limit; after those hours brightness drops and the projector will prompt for a new lamp module.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



