CHRISTIE
CHRISTIE 03-000866-01P 225W projector lamp
A 225W replacement projector lamp module with bulb and housing ready for installation, offering 2,000 normal or 3,000 economy hours
- TypeProjector Lamp
- Wattage225W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Genuine replacement lamp fits Christie projectors directly
- 225W UHP bulb delivers specified brightness output
- Up to 3000 hours life in economy mode
- Fully assembled module enables quick installation
- Manufactured to ISO9001 quality standards
Genuine 225W replacement lamp
This Christie 03-000866-01P module delivers a new UHP bulb rated at 225W inside a pre-assembled housing. It is designed for technicians and venue operators who need a direct swap to restore projector brightness without separate bulb handling.
Suits owners of compatible Christie projectors
Buyers whose projector requires a different wattage or connector should look elsewhere, as this module is built to a specific 225W specification. It is not intended for units that accept only lower-power lamps or proprietary form factors not matching this housing.
Pre-assembled housing and ISO9001 build
The bulb ships already seated in its cage, removing the alignment step that separate bulbs demand. Each unit is produced under ISO9001 controls and tested for ignition, voltage, beam performance and run-time before dispatch.
Highlights
- Genuine replacement lamp fits Christie projectors directly
- 225W UHP bulb delivers specified brightness output
- Up to 3000 hours life in economy mode
- Fully assembled module enables quick installation
- Manufactured to ISO9001 quality standards
Specifications
| Brand | Christie |
|---|---|
| Type | Projector Lamp |
| Wattage | 225W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
Which Christie projector models accept the 03-000866-01P lamp module?
This lamp module is built for Christie projectors that specify the 03-000866-01P part number; check your projector manual to confirm compatibility before ordering.
Will the 225W UHP bulb match the brightness of the original lamp in my older Christie unit?
The 225W UHP bulb delivers the same wattage and lamp life ratings — 2,000 hours normal, 3,000 hours economy — as the original specification for this part.
How can I verify the lamp is operating correctly after installation?
After fitting the module, power on the projector and confirm the lamp hour counter resets to zero and the on-screen status shows normal ignition with no error codes.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



