CHRISTIE
CHRISTIE 003-102385 450W Projector Lamp
A 450 W replacement lamp module with Ushio NSH bulb and housing, rated for 1,000 hours normal or 1,500 hours economy use
- TypeProjector Lamp
- Wattage450W
- Lamp Life1,000 Hrs. (Normal) - 1,500 Hrs. (Economy)
- OEM Ushio NSH bulb ensures reliable ignition
- 450W output matches original projector specification
- 1,000 hours normal life reduces replacement frequency
- 1,500 hours economy mode extends operating time
- Fully assembled housing enables quick tool-free installation
Ready-to-install 450W lamp module
This Christie 003-102385 replacement projector lamp arrives as a fully assembled bulb and housing unit. It is designed for straightforward installation in compatible Christie projectors. The module uses a new Ushio NSH 450W bulb. It is supplied new and ready for immediate use.
Replaces worn or dimmed projector lamps
The module serves as a direct replacement when the original lamp reaches end of life or brightness drops below usable levels. Switching to a fresh 450W unit restores the projector's intended light output. The jump is worth it when image quality suffers from an ageing lamp.
Rated for 1,000 hours normal or 1,500 hours economy
In normal mode the lamp delivers up to 1,000 hours of operation before replacement is needed. Economy mode extends the rated life to 1,500 hours for less demanding environments. The 450W power rating sets the brightness ceiling for the projector. It is not suited for applications requiring higher-wattage light engines.
Highlights
- OEM Ushio NSH bulb ensures reliable ignition
- 450W output matches original projector specification
- 1,000 hours normal life reduces replacement frequency
- 1,500 hours economy mode extends operating time
- Fully assembled housing enables quick tool-free installation
Specifications
| Brand | Christie |
|---|---|
| Type | Projector Lamp |
| Wattage | 450W |
| Lamp Life | 1,000 Hrs. (Normal) - 1,500 Hrs. (Economy) |
Questions about this item
Does the Christie 003-102385 lamp module arrive fully assembled so it fits the projector housing without extra parts?
Yes, the module ships as a complete assembly with the 450W Ushio NSH bulb already seated in its housing, so it slides straight into the Christie projector without additional components.
What is the correct sequence for installing the lamp and the step users often skip?
Power off the projector, let it cool completely, remove the lamp cover, release the retaining screws, slide the new module in until the connector seats firmly, re-tighten the screws, replace the cover, then reset the lamp-hour counter in the menu — the counter reset is the step most often missed.
When should the 450W NSH bulb be replaced based on the rated hours?
Plan replacement at 1,000 hours in normal mode or 1,500 hours in economy mode; the projector's lamp-hour counter tracks usage so you can schedule the change before brightness drops below usable levels.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



