CHRISTIE
CHRISTIE 003-100856-01 200W projector lamp
200 W projector lamp module with Osram P-VIP bulb and housing, rated 2,000 hours normal or 3,000 hours economy life
- TypeProjector Lamp
- Wattage200W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Ready-to-install module with bulb and housing
- 200W P-VIP lamp delivers bright projection
- 2,000 hours normal life or 3,000 hours economy
- Manufactured to ISO 9001 quality standards
- Tested for beam performance, ignition and run-time
Ready-to-install 200W lamp module
This Christie 003-100856-01 replacement lamp ships as a complete assembly with a new Osram P-VIP 200W bulb already mounted in its housing. It is designed for straightforward installation in compatible Christie projectors without additional tools or alignment steps.
For owners of matching Christie models.
The module fits the specific Christie projectors that use the 003-100856-01 part number. Buyers with different projector makes or models should verify their required part number before ordering, as this lamp will not work in units that call for a different specification.
2000 to 3000 hours of rated life
In normal mode the lamp is rated for 2000 hours, while economy mode extends the rating to 3000 hours. Actual runtime will vary with usage patterns, ambient temperature and how often the projector is power-cycled, so plan replacement when brightness drops below acceptable levels.
Highlights
- Ready-to-install module with bulb and housing
- 200W P-VIP lamp delivers bright projection
- 2,000 hours normal life or 3,000 hours economy
- Manufactured to ISO 9001 quality standards
- Tested for beam performance, ignition and run-time
Specifications
| Brand | Christie |
|---|---|
| Type | Projector Lamp |
| Wattage | 200W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
Which Christie projector models accept the 003-100856-01 lamp module?
This module is built for Christie projectors that specify the 003-100856-01 part number; check your projector’s service manual or lamp door label to confirm compatibility before purchase.
Can I keep my existing Christie projector housing and only swap the 200W Osram P-VIP bulb?
The 003-100856-01 ships as a complete bulb-and-housing assembly, so no separate housing is required and the old housing is replaced entirely during installation.
How do I verify the lamp is operating correctly after fitting the 003-100856-01?
Power on the projector, confirm a stable image with no flicker, then check the on-screen lamp-hour counter — it should read zero or near zero and increment normally in both Normal and Economy modes.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



