We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black wall-mounted TV bracket with tilt mechanism for displays up to 65 inches

Chief

Chief MTA1U TV mount tilt 125 lb 65" 100x100 black

SKU CH-X073-KNKKK MPN MTA1U

Low-profile tilt wall mount holds displays up to 65 inches and 125 lb with 100 x 100 VESA pattern

  • Mount StyleWall Mount
  • ColorBlack
  • TV Weight Capacity125 lb
  • Weight15.65
  • Supports heavy displays up to 125 lb weight capacity
  • Fits large 65 inch screens for expansive viewing
  • Compatible with 100 x 100 VESA mounting patterns
  • Low-profile wall design keeps displays close to surface
  • Installer-inspired features enable faster and easier installation

Tilt Wall Mount for 65-Inch Displays

This Chief MTA1U tilt wall mount supports flat-panel displays up to 65 inches with a 100 x 100 VESA pattern. It is rated for a maximum load of 125 lb and finished in black. The low-profile design suits home-theatre installations where a fixed viewing angle is preferred. Installers gain a sturdy mounting platform for larger screens.

Installer-Focused Adjustment Features

The mount incorporates Centerless shift, Centris tilt and ClickConnect latching to simplify alignment and locking. These mechanisms allow flexible adjustments during installation and easier cable management behind the display. Added stability comes from the reinforced wall plate and latch system. No special tools are required beyond standard hardware for the mounting surface.

125 lb Weight Capacity Decides Fit

The single specification that determines suitability is the 125 lb weight limit. Verify that the display's actual weight does not exceed this figure before purchasing. The 100 x 100 mounting hole pattern must also match the screen's rear interface. Displays heavier than 125 lb or with a different VESA pattern cannot use this mount.

Highlights

  • Supports heavy displays up to 125 lb weight capacity
  • Fits large 65 inch screens for expansive viewing
  • Compatible with 100 x 100 VESA mounting patterns
  • Low-profile wall design keeps displays close to surface
  • Installer-inspired features enable faster and easier installation

Specifications

BrandCHIEF
Mount StyleWall Mount
ColorBlack
TV Weight Capacity125 lb
Weight15.65
Shipping weight7.26 kg
Package size780 × 470 × 79 mm

Questions about this item

After mounting my 65" display on this tilt bracket, how can I confirm the Centris tilt is adjusted correctly?

The Centris tilt mechanism holds the panel at any angle you set without drifting. If the screen stays exactly where you positioned it and moves smoothly when you apply light pressure, the tilt is working as intended.

What hardware comes with the MTA1U and what must I source separately for a 100 x 100 VESA display?

The mount includes the wall plate, display brackets, ClickConnect latching hardware and all lag bolts and anchors for wood or concrete studs. You only need to supply the display itself and the tools for drilling pilot holes.

My screen is a 65" model weighing 125 lb with a 100 x 100 pattern — is the MTA1U the right version?

Yes. The MTA1U is rated for displays up to 65" and 125 lb, and its brackets match the 100 x 100 mounting pattern exactly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.