We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black ceiling plate with adjustable column for projector mount

CHIEF MANUFACTURING

CHIEF MANUFACTURING CMA100 Ceiling Plate with Adjustable Column 500 lb

SKU CH-FXQ6-4XAAB

Ceiling plate with adjustable column supports projectors up to 500 lb and sets drop distance from 24 1/4 to 46 inches

  • TypeDrain Components
  • Supports projectors up to 500 lb for secure overhead mounting
  • Adjustable column provides drop distance from 24 to 46 inches for flexible positioning
  • Includes Nylock nuts, washers, bolts and hex wrench for complete installation
  • Black finish blends discreetly with ceiling environments
  • Designed specifically for projector compatibility and stable support

Ceiling Plate for Projector Mounting

The Chief Manufacturing CMA100 ceiling plate provides a stable overhead anchor point for installing a projector in commercial or educational spaces. Its adjustable column lets installers set the drop distance between 24 1/4 and 46 inches to suit ceiling height and sight-line requirements. The assembly supports a maximum load of 500 lb, accommodating heavy professional projectors.

Fixed Hardware Installation

Because the plate bolts directly to the structure, there are no moving parts, fans or electrical draws to generate noise or heat during operation. The static mounting relies on the included grade-five fasteners to maintain alignment without ongoing power consumption or thermal management.

Included Fasteners Simplify Setup

The package supplies two nylock nuts, four flat washers, two bolts and a 5/32 inch hex wrench, so the installer can complete the mount without sourcing additional hardware. These components secure the column to the plate and the plate to the ceiling joist in a single visit.

Highlights

  • Supports projectors up to 500 lb for secure overhead mounting
  • Adjustable column provides drop distance from 24 to 46 inches for flexible positioning
  • Includes Nylock nuts, washers, bolts and hex wrench for complete installation
  • Black finish blends discreetly with ceiling environments
  • Designed specifically for projector compatibility and stable support

Specifications

TypeDrain Components

Questions about this item

How do I set the drop distance between 24 1/4 and 46 inches, and what step do installers often miss?

Loosen the column clamp, slide the column to the desired length within the 24 1/4 to 46 inch range, then tighten the clamp securely; the step often missed is confirming both Nylock nuts are fully engaged on the 1/4 - 20 bolts before mounting the projector.

What hardware from the kit will need checking or replacement after repeated projector swaps?

The two 1/4 - 20 x 2 1/2 inch bolts, four 1/4 inch flat washers and two 1/4 - 20 Nylock nuts should be inspected for thread wear or corrosion each time the projector is removed; replace any fastener that no longer locks positively.

At what load does the ceiling plate reach its rated limit during continuous operation?

The assembly is rated for a maximum load capacity of 500 lb; sustained loads at or above this figure will reach the structural limit first.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.