We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black square ceiling plate with 44 mm offset, 203 mm sides

Chief

Chief CPA330 ceiling mount black 1.75" offset

SKU CH-86C7-13JWG

An 8-inch square ceiling plate with a 44 mm offset for cable clearance, compatible with Chief CPA columns and LCM or MCM ceiling mounts

  • TypeCeiling Mount
  • CompatibilityChief offers a variety of ceiling plates that are compatible
  • FeaturesIncludes 8" (203 mm) square ceiling plate with 1.75" (44 mm)
  • 75" offset routes cables cleanly above flat ceilings
  • 8" square plate distributes load across four anchor points
  • Pin-connection design locks directly to CPA extension columns
  • Works with LCM and MCM single or multi-display mounts
  • 95" overall profile keeps projector tight to ceiling

Offset Ceiling Plate

The Chief CPA330 is a compact ceiling plate that adds a 44 mm offset to a flat ceiling surface. It creates a cable exit path and connects directly to the pin-connection CPA column system. Installers working with single or multi-display ceiling mounts use it to gain routing space without lowering the entire assembly.

Build Integration

The 203 mm square plate bolts to the structure and accepts CPA extension columns, LCM single and multi-display mounts, and MCM single-display mounts. Its pin connection locks the column in place without extra hardware. The 44 mm stand-off clears low-profile conduit or surface raceway that would otherwise sit flush against the ceiling.

Capacity and Headroom

The assembly measures 100 mm overall height once the column is seated, so the drop from ceiling to mount stays minimal. It supports the load ratings of the attached LCM or MCM system rather than adding its own limit. Builds that need a larger stand-off or a different mounting pattern will require a different plate.

Highlights

  • 75" offset routes cables cleanly above flat ceilings
  • 8" square plate distributes load across four anchor points
  • Pin-connection design locks directly to CPA extension columns
  • Works with LCM and MCM single or multi-display mounts
  • 95" overall profile keeps projector tight to ceiling

Specifications

BrandCHIEF
ModelCPA330
TypeCeiling Mount
CompatibilityChief offers a variety of ceiling plates that are compatible with:
CPA extension columns
LCM Single Display Ceiling Mounts
MCM Single Display Ceiling Mounts
LCM Multi-Display Ceiling Mounts
FeaturesIncludes 8" (203 mm) square ceiling plate with 1.75" (44 mm) high offset
Offset provides cable exit when mounting to a flat ceiling surface
Compatible with pin connection CPA column system
Overall height is 3.95" (100 mm)

Questions about this item

How much vertical clearance does the 1.75 inch offset plate add between the ceiling and the column?

The offset plate provides 1.75 inches (44 mm) of clearance, making the overall height 3.95 inches (100 mm) from the ceiling surface to the column connection.

Does the Chief CPA330 generate any noise or heat during continuous operation?

No, the CPA330 is a passive mounting plate with no moving parts or electronics, so it produces no noise, heat, or power draw.

Which Chief column or mount system must I already own to attach this ceiling plate?

The plate uses the pin-connection CPA column system and is compatible with CPA extension columns, LCM and MCM single-display mounts, and LCM multi-display ceiling mounts.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.