Chicago-Latrobe
Chicago-Latrobe 65015 Screw Extractor 800 No 6-3/8 (Drill Size 31/64 in)
Removes broken right-hand bolts from 15/16 in to 1 1/8 in using a 31/64 in drill size and carbon steel spiral flute
- TypeBroaches
- Removes broken bolts with spiral-flute grip
- Drill size 31/64 in guides precise extraction
- Carbon steel body resists wear under torque
- Square 11/16 in drive fits standard wrenches
- Handles right-hand threads from 15/16 in to 1 1/8 in
Professional screw extractor for broken fasteners
The Chicago-Latrobe 65015 is a spiral flute extractor designed to remove broken bolts and studs with right-hand threads. It fits bolt sizes from 15/16 in to 1 1/8 in and requires a 31/64 in drill size for the pilot hole. The carbon steel construction provides the hardness needed for gripping damaged fastener interiors. Mechanics and maintenance technicians use it when a bolt head shears off flush or below the surface.
Upgrades from basic straight-flute
This size 800 extractor handles larger diameter bolts that smaller extractor sets cannot engage. The spiral flute design bites deeper into the drilled pilot hole as torque increases, reducing the chance of the extractor slipping or breaking inside the bolt. The jump is worth it when removing seized or corroded fasteners in heavy equipment, truck frames or industrial machinery where bolt diameters exceed 15/16 in and standard extractor kits stop at smaller sizes.
11/16 in square drive for high-torque removal
The 3 3/4 in overall length and 11/16 in square drive accept heavy ratchets, breaker bars or impact sockets for maximum leverage. Carbon steel handles the torque required for bolts up to 1 1/8 in without twisting off, provided the pilot hole is drilled accurately to 31/64 in. It runs out when the bolt material is harder than the extractor, when the broken piece is too short to engage the flutes, or when the bolt uses left-hand threads which this right-hand tool cannot extract.
Highlights
- Removes broken bolts with spiral-flute grip
- Drill size 31/64 in guides precise extraction
- Carbon steel body resists wear under torque
- Square 11/16 in drive fits standard wrenches
- Handles right-hand threads from 15/16 in to 1 1/8 in
Specifications
| Brand | CHICAGO-LATROBE |
|---|---|
| Type | Broaches |
Questions about this item
What drill size do I need for the 65015 extractor?
Drill a 31/64 in hole before using this spiral flute extractor.
How do I turn the extractor once it is seated?
Fit an 11/16 in square drive wrench or socket onto the drive end and rotate counter-clockwise.
When should I replace this carbon-steel extractor?
Replace it when the spiral flutes show visible wear or the tool no longer grips the broken bolt securely.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
