We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cherne 270237 3 in end-of-pipe plug with zinc wing nut and ABS plate

Cherne

Cherne 270237 3 in End-of-Pipe Plug with Wing Nut

SKU CH-7AWJ-C9AAD MPN 270237

End-of-pipe plug seals 3 in pipes with a wing-nut handle, handling 17 psi air or 40 ft water head

  • TypeDrain Components
  • MaterialHAWA
  • Seals pipe ends up to 3.1 in ID
  • Wing nut expands plug for tight 2.8–3.1 in grip
  • Withstands 17 psi air or 40 ft water head
  • Compact 2.5 in height fits confined spaces
  • ABS plate with zinc handle resists corrosion

3 in End-of-Pipe Plug

The Cherne 270237 is a new end-of-pipe plug designed to seal 3 in pipes from the inside. Its gripper mechanism expands against the pipe wall when the wing nut is tightened. The seal operates at the pipe end and accepts an internal diameter range of 2.8 in to 3.1 in. The assembly stands 2.5 in tall overall.

Suits temporary pipe sealing, not permanent closure

This plug suits maintenance crews and contractors who need a reusable, tool-free seal for pressure testing or flow isolation. The wing nut allows hand installation and removal without spanners. It is not for permanent installations where a fixed mechanical joint or solvent-weld cap is required. Buyers needing a bypass port or a padlockable security feature should look elsewhere.

17 psi air / 40 ft water back-pressure rating

The single specification that decides fit is the maximum back-pressure rating: 17 psi for air and 40 ft of head for water. If the test or isolation pressure exceeds these values the plug will not hold. The zinc wing nut and ABS plate deliver the stated rating within the 2.8 in to 3.1 in inside-diameter window.

Highlights

  • Seals pipe ends up to 3.1 in ID
  • Wing nut expands plug for tight 2.8–3.1 in grip
  • Withstands 17 psi air or 40 ft water head
  • Compact 2.5 in height fits confined spaces
  • ABS plate with zinc handle resists corrosion

Specifications

TypeDrain Components
MaterialHAWA
BrandCherne Industries
Model270237

Questions about this item

How can I verify the plug is sealing correctly after installation?

After tightening the wing nut, apply up to 17 psi air or 40 ft of water head and check that no pressure drop or leakage occurs at the pipe end.

What components are included and what must I supply separately?

The package contains the end-of-pipe plug with a zinc wing nut and ABS sealing plate; a water fill port or hose is not included and must be purchased if needed.

Which pipe sizes does this model 270237 fit?

Model 270237 is designed for 3 in nominal pipe with an inside diameter between 2.8 in and 3.1 in.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.