We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cherne 270229 pipe plug with zinc wing nut head and ABS sealing plate

Cherne

Cherne 270229 Pipe Plug 2 in 1.9–2.17 in 17 psi 40 ft head

SKU CH-DXE4-BFT6F MPN 270229

Seals 2 in pipes with 1.9–2.17 in diameter at 17 psi air or 40 ft head

  • TypeDrain Components
  • MaterialHAWA
  • Seals 2 in pipes with 17 psi air hold
  • Handles 40 ft water head for reliable testing
  • Fits 1.9–2.17 in ID range securely
  • Wing-nut zinc handle speeds installation and removal
  • ABS plate resists corrosion for long service life

End-of-pipe seal for 2 in pipes

This Cherne 270229 pipe plug creates a temporary seal at the end of a 2 in pipe. The wing-nut head expands the ABS sealing plate to fit inside diameters from 1.9 in to 2.17 in. It withstands up to 17 psi air pressure or 40 ft of water head. The zinc handle allows manual tightening without tools.

Suited for pressure testing and temporary blockage

Plumbers and contractors use this plug for testing drain lines or isolating pipe sections during repairs. The end-of-pipe seal design means it cannot be used for bypass pumping or flow-through applications. Buyers needing a bypass connection or a larger diameter range should look at other models.

1.9–2.17 in expansion range decides fit

The plug only seals pipes whose inside diameter falls between 1.9 in and 2.17 in. Measure the pipe ID before purchase; a smaller or larger bore will not seal. The 17 psi and 40 ft head ratings define the maximum test pressure this plug can hold.

Highlights

  • Seals 2 in pipes with 17 psi air hold
  • Handles 40 ft water head for reliable testing
  • Fits 1.9–2.17 in ID range securely
  • Wing-nut zinc handle speeds installation and removal
  • ABS plate resists corrosion for long service life

Specifications

TypeDrain Components
MaterialHAWA
BrandCherne Industries
Model270229

Questions about this item

Will the Cherne 270229 pipe plug fit inside my existing 2 in pipe that measures 1.9 in to 2.17 in internal diameter?

Yes, the plug is designed for 2 in pipes with an internal diameter range of 1.9 in to 2.17 in and seals at the end of the pipe.

How can I verify the Cherne 270229 is holding pressure correctly after installation?

Pressurise the line up to 17 psi air or 40 ft of head water; the zinc wing nut handle lets you tighten the ABS plate seal until pressure holds steady.

Does the Cherne 270229 come with a water fill hose or do I need to buy one separately?

The water fill port and hose are not included; you will need to source a compatible hose separately for water testing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.