We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow inflatable test ball plug with ring and chain, 5.25 inches deflated length

Cherne

Cherne 270032 Test Ball Plug 5.25 in Deflated Length

SKU CH-2YE4-Y0RWD MPN 270032

Inflatable test ball plug with tire-valve inflation fits 2.77 in to 3.25 in pipe IDs and includes a tether ring and chain

  • TypeDrain Components
  • MaterialHAWA
  • Fits pipes from 2.77 in to 3.25 in ID
  • Deflated diameter 2.64 in for easy insertion
  • 25 in deflated length reaches deeper drains
  • Tire-valve air connection inflates with standard pump
  • Ring-and-chain tether prevents loss in pipe

Test Ball Plug for Pipe Testing

This Cherne test ball plug is designed for temporary pipeline testing and isolation. It fits inside pipes with an inside diameter between 2.77 in and 3.25 in. The deflated dimensions are 2.64 in diameter by 5.25 in length, allowing easy insertion. It features a tire valve air connection and a ring-and-chain tether.

Suits Gravity and Low-Pressure Lines

Plumbers and contractors performing leak tests on gravity sewers or low-pressure drains will find this plug suitable. It is not intended for high-pressure applications or pipes outside the stated diameter range. Users requiring a bypass connection or a different inflation method should select an alternative model.

Critical Sizing: 2.77 in to 3.25 in Pipe ID

The single specification that determines fit is the pipe inside diameter range of 2.77 in minimum to 3.25 in maximum. The deflated plug diameter of 2.64 in must pass through the pipe opening before inflation. Verify the exact pipe ID before purchase to ensure a proper seal.

Highlights

  • Fits pipes from 2.77 in to 3.25 in ID
  • Deflated diameter 2.64 in for easy insertion
  • 25 in deflated length reaches deeper drains
  • Tire-valve air connection inflates with standard pump
  • Ring-and-chain tether prevents loss in pipe

Specifications

TypeDrain Components
MaterialHAWA
BrandCherne Industries
Model270032

Questions about this item

How much air pressure is needed to keep the 2.64 in deflated diameter plug inflated during long pipe tests?

The plug uses a tire-valve air connection; inflate until it seals against the pipe wall between 2.77 in and 3.25 in inside diameter.

What tools or fittings are required to attach the air hose to the tire-valve connection on this 270032 model?

A standard tyre inflator or compressor chuck that fits a Schrader valve is all that is needed.

Will the 5.25 in deflated length plug fit inside a 3 in nominal pipe that has heavy corrosion buildup?

The plug seals pipes with an inside diameter from 2.77 in to 3.25 in; heavy corrosion that reduces the bore below 2.77 in will prevent a seal.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.