We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cherne pneumatic test ball plug, rubber, 2 inch nominal size

Cherne

Cherne 262010 pneumatic test ball trap 2 in

SKU CH-BP3M-XPTXH MPN 262010

Pneumatic rubber test ball blocks sewer flow or enables air testing with 40 PSI inflation, 1.88 to 2.25 inch range, 22 PSI back air pressure and 50 feet of head

  • TypeDrain Components
  • MaterialHAWA
  • Pneumatic operation inflates quickly to 40 PSI for reliable sealing
  • Rubber construction resists wear during sewer flow blocking or air tests
  • Fits pipes from 1.88 in to 2.25 in nominal diameter
  • Withstands 22 PSI back air pressure and 50 ft of head pressure
  • Compact deflated size of 6L x 1.75D in eases insertion into tight lines

2-inch pneumatic test plug

The Cherne 262010 is a rubber pneumatic plug designed to block sewer flow or conduct air tests in 2-inch nominal pipes. It fits internal diameters between 1.88 and 2.25 inches and requires 40 PSI inflation pressure. The deflated body measures 6L x 1.75D inches for insertion through cleanouts.

Check pipe size and test limits

Verify the pipe inside diameter falls within the 1.88 to 2.25 inch range before ordering. Ensure the test procedure does not exceed 22 PSI back air pressure or 50 feet of head back pressure. Confirm a regulated air source capable of delivering exactly 40 PSI inflation pressure is available on site.

Rubber construction and sizing

The rubber material provides a conforming seal against irregular pipe walls within the stated diameter range. The compact deflated profile allows passage through standard access points without additional tools. No inflation hose, gauge or control valve is included with the plug itself.

Highlights

  • Pneumatic operation inflates quickly to 40 PSI for reliable sealing
  • Rubber construction resists wear during sewer flow blocking or air tests
  • Fits pipes from 1.88 in to 2.25 in nominal diameter
  • Withstands 22 PSI back air pressure and 50 ft of head pressure
  • Compact deflated size of 6L x 1.75D in eases insertion into tight lines

Specifications

TypeDrain Components
MaterialHAWA
BrandCherne Industries
Model262010

Questions about this item

What comes with the Cherne 262010 pneumatic test ball trap?

The package contains the pneumatic test ball plug itself. An inflation hose and a pressure gauge capable of reading 40 PSI are required but sold separately.

How do I choose the right size for a 2-inch pipe?

This model fits pipes with an internal diameter between 1.88 In and 2.25 In. Verify your pipe ID falls in that range before ordering.

What does the 22 PSI back-pressure rating mean on site?

It indicates the plug will hold a 22 PSI air test or a 50-foot head of water without leaking when inflated to 40 PSI.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.