We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Y-splitter cable with one 20-pin male header and two USB 3.0 Type-A female ports, 20cm long

chenyang USB 3.0 19/20Pin Male to 2 Female Y Splitter Header Cable 20cm

SKU CH-S3AG-T0YPK

Adds two USB 3.0 Type-A ports to a motherboard 19/20-pin header with a 20 cm Y-splitter cable

  • TypeUSB
  • Connector TypeUSB Type A
  • ColorWithout Screw Mount
  • Connector Number20
  • Connector DetailUSB Type A
  • Terminal GenderFemale-to-Female
  • Adds two USB 3.0 ports to a 20-pin motherboard header
  • Supports 5 Gb/s data transfer over copper conductors
  • 20 cm length fits tight front-panel routing
  • Tangle-free design simplifies internal cable management
  • Direct plug-in to compatible 19/20-pin headers

USB 3.0 front panel splitter

This chenyang adapter converts a single motherboard 19/20-pin USB 3.0 header into two standard USB Type-A female ports. The 20 cm cable brings front-panel connectivity to cases where the header is far from the front I/O cutout. Copper conductors support the full 5 Gb/s USB 3.0 signalling rate. The tangle-free jacket keeps routing tidy inside the chassis.

Builders adding front USB 3.0 ports

Suitable for system integrators and DIY builders whose motherboard provides only one 20-pin header but whose case has two front-panel USB 3.0 ports. Not suited for installations that require screw-mount retention on the header side. Not suited for builds needing longer reach than 20 cm between header and front panel. Not suited for converting newer 19-pin Type-E keyed headers without verifying pin compatibility first.

19/20-pin header to dual Type-A

The decisive specification is the single 19/20-pin male header that splits to two USB 3.0 Type-A female connectors. This pin count and gender arrangement must match the motherboard header and the case front-panel cables exactly. If the board uses a different header keying or the case cables terminate in a different connector, the adapter will not fit.

Highlights

  • Adds two USB 3.0 ports to a 20-pin motherboard header
  • Supports 5 Gb/s data transfer over copper conductors
  • 20 cm length fits tight front-panel routing
  • Tangle-free design simplifies internal cable management
  • Direct plug-in to compatible 19/20-pin headers

Specifications

Brandchenyang
TypeUSB
Connector TypeUSB Type A
ColorWithout Screw Mount
Connector Number20
Connector DetailUSB Type A
Terminal GenderFemale-to-Female
Speed5 gigabits_per_second
ConstructionCopper
FeaturesTangle Free

Questions about this item

Does my motherboard need a 19/20-pin USB 3.0 header to plug this splitter in?

Yes, the male end is a 19/20-pin USB 3.0 header that connects directly to the motherboard header.

Will this work with an older motherboard that only has a 10-pin USB 2.0 front-panel header?

No, the 19/20-pin male connector is keyed for USB 3.0 headers and will not fit a 10-pin USB 2.0 header.

How can I verify the splitter is running at USB 3.0 speed after I connect it?

Plug a USB 3.0 flash drive into one female port and check that the transfer rate reaches the 5 Gbps rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.