Chemtronics
Chemtronics 80-1-10 Desoldering Wick 10 ft Braid 1 .03 in Rosin
Copper braid 0.03 in wide on a 10 ft ESD-safe spool uses non-corrosive rosin flux meeting DOD-STD-883E and NASA-STD-8739.3
- TypeSolders & Supplies
- Removes solder cleanly with ultra-pure Type R rosin flux
- 10 ft length provides ample material for multiple rework tasks
- Fine 0.03 in braid width suits precision component pads
- ESD-safe bobbin protects static-sensitive devices during handling
- Meets DOD, IPC, MIL and NASA standards for critical applications
What this desoldering braid does
Chemtronics 80-1-10 is a lead-free, rosin-flux desoldering wick on a 10 ft spool. The braid width is .03 in and the flux classification is ROL0. It meets DOD-STD-883E, IPC J-STD-004 Method 2022, MIL-F-14256 F and NASA-STD-8739.3 standards. The ESD-safe bobbin protects static-sensitive components during rework.
Check your soldering setup first
Verify that your iron tip can heat the .03 in copper braid quickly enough for the joints you are clearing. Confirm that rosin-based ROL0 flux is acceptable for your assembly process and that no-clean or water-soluble alternatives are not required. Ensure the work area can accommodate an ESD-safe spool and that you have suitable ventilation for flux fumes.
Build quality and daily handling
The ultra-high-purity Type R rosin flux is noncorrosive and leaves minimal residue on pads. White/gray braid colour makes solder uptake easy to see while you work. The ESD-safe bobbin prevents static discharge when the spool sits on a grounded bench. Ten feet of length supports multiple desoldering sessions before a replacement spool is needed.
Highlights
- Removes solder cleanly with ultra-pure Type R rosin flux
- 10 ft length provides ample material for multiple rework tasks
- Fine 0.03 in braid width suits precision component pads
- ESD-safe bobbin protects static-sensitive devices during handling
- Meets DOD, IPC, MIL and NASA standards for critical applications
Specifications
| Brand | CHEMTRONICS |
|---|---|
| Type | Solders & Supplies |
Questions about this item
Does the 10 ft spool of 0.03 in braid come on an ESD-safe bobbin, or do I need a separate dispenser?
The wick is wound on an ESD-safe bobbin so no extra dispenser is required.
When should I choose Braid Number 1 at 0.03 in versus a wider braid?
Braid Number 1 at 0.03 in is intended for fine-pitch work; wider braids handle larger solder volumes.
How does the ROL0 rosin flux behave during rework on a live board?
The non-corrosive Type R rosin flux (ROL0) activates at soldering temperature and leaves minimal residue that meets IPC J-STD-004.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
