We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red 45-degree PVC Schedule 80 elbow, 1-inch socket both ends

Chemtrol

Chemtrol 6506 45° Elbow 1 in Socket x Socket Schedule 80

SKU CH-H4V4-7XJPE

A 45-degree Schedule 80 PVC elbow joins two 1-inch socket pipes and withstands 360 psi from 73 to 280 degrees F

  • 45-degree flow change with 1 in socket connections
  • Schedule 80 polyvinylidene handles 360 psi at 73 °F
  • Red body for quick visual identification
  • Rated from 73 to 280 °F operating range
  • 2 39/64 in overall length fits tight spaces

Chemtrol 6506 45° Socket Elbow

This Chemtrol 6506 elbow joins two 1-inch Schedule 80 pipes at a 45-degree angle using socket connections on both ends. The polyvinylidene construction handles pressures up to 360 psi at 73 degrees Fahrenheit. A seal is included for a secure, leak-free joint.

Suits chemical and industrial piping up to 280

Installers needing a corrosion-resistant turn in a Schedule 80 system will find this fitting appropriate. It will not serve applications requiring threaded connections, different angles, or pipe sizes other than 1 inch.

360 psi maximum operating pressure at 73°F

This pressure rating is the critical specification for system design. Exceeding it risks joint failure, so verify your system pressure stays within this limit before installation.

Highlights

  • 45-degree flow change with 1 in socket connections
  • Schedule 80 polyvinylidene handles 360 psi at 73 °F
  • Red body for quick visual identification
  • Rated from 73 to 280 °F operating range
  • 2 39/64 in overall length fits tight spaces

Specifications

BrandNIBCO

Questions about this item

How much heat can this 45° elbow handle in continuous service?

The fitting is rated for fluid temperatures from 73 to 280 degrees F, so it will not soften or leak in hot-water loops within that range.

What pipe schedule and joining method do I need to install this elbow?

It requires 1 in Schedule 80 pipe and solvent-cement socket joints; the seal is already included in the box.

Will the 2 39/64 in overall length match the spacing of my current 1 in fittings?

Yes, the centre-to-end dimension is 2 39/64 in, so it aligns with standard 1 in socket fittings in the same layout.

More in Fittings & Couplings

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.