We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White metering pump housing with black control panel and quarter-inch discharge fitting

CHEMTECH

CHEMTECH XP030LFHXG19 30 GPD 80 PSI trap

SKU CH-7A34-12GN2 MPN XP030LFHXG19

Chemical metering pump delivering 30 GPD at 80 PSI with manual control and 1/4 in. discharge connection

  • TypeDrain Components
  • Chemical metering pump delivers 30 GPD at 80 PSI
  • Compatible with hydrochloric acid up to 30 percent concentration
  • Handles sodium hypochlorite solutions at 5, 10 and 20 percent
  • Works with sulfuric acid at 10 and 20 percent strength
  • Manual control program offers direct operation without programming

Chemical Metering Pump

The Chem-Tech XP030LFHXG19 is a chemical metering pump rated for 30 GPD at 80 PSI. It handles a wide range of chemicals including hydrochloric acid, sodium hypochlorite, and sulfuric acid at various concentrations. Manual control programs allow direct adjustment of output. The discharge connection uses a 1/4 in. fitting.

Water Treatment & Chemical Dosing

This pump suits operators dosing chemicals for water treatment, pH adjustment, or disinfection where flow rates up to 30 GPD are required. It is compatible with ammonium hydroxide, calcium carbonate, oils, phosphoric acid, potassium hydroxide, and sodium hydroxide. Facilities needing automated or programmable control should look at other models. Applications demanding higher pressure or greater daily volume will need a larger unit.

30 GPD at 80 PSI Output

The 30 GPD capacity at 80 PSI is the key specification that determines if this pump matches the system demand. This rating defines the maximum chemical volume delivered per day against the stated pressure. Verify that the process requires no more than this flow and pressure combination. The 1/4 in. discharge connection must also match the existing piping.

Highlights

  • Chemical metering pump delivers 30 GPD at 80 PSI
  • Compatible with hydrochloric acid up to 30 percent concentration
  • Handles sodium hypochlorite solutions at 5, 10 and 20 percent
  • Works with sulfuric acid at 10 and 20 percent strength
  • Manual control program offers direct operation without programming

Specifications

TypeDrain Components
BrandChem-Tech
ModelXP030LFHXG19

Questions about this item

What comes with the XP030LFHXG19 and what must be purchased separately?

The XP030LFHXG19 metering pump unit is supplied. Tubing, fittings, suction and discharge piping, and any mounting hardware are not included and must be sourced separately.

How do I choose between the available capacity and pressure ratings for this model?

This model is a single configuration rated at 30 GPD flow and 80 PSI maximum discharge pressure; there are no alternative capacity or pressure versions listed for the XP030LFHXG19.

What does the 30 GPD rating mean when the pump is installed in a system?

At the rated 80 PSI discharge pressure the pump will deliver up to 30 gallons per day; actual output will vary with suction conditions, fluid viscosity, and back-pressure in the installed piping.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.