We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rubber cable protector, 10 ft long, one channel, smooth finish

Checker Distributors

Checker Distributors RFD4-10 Cable Protector 10 ft 1 Channel

SKU CH-KGV3-G3YVE

Single-channel rubber cable protector spans 10 ft and supports 440 lb per axle

  • TypeCable Management & Conduit
  • Protects cables up to 3/4 in. diameter with a single 1 in. wide channel
  • Handles 440 lb per axle load for heavy vehicle traffic
  • Links multiple sections together using built-in connector pins
  • Ten-foot rubber length covers long cable runs in one piece
  • Supplied unslit so you choose where to open the channel

Single-channel cable protector for temporary wiring

The Checkers RFD4-10 provides a 10 ft rubber channel to cover cables crossing pedestrian or light-vehicle routes. Its 1 in wide by 3/4 in high cavity accepts one cable up to 3/4 in diameter. The linkable pin system lets multiple sections join for longer runs.

Low-profile rubber construction handles light loads

At 1 in overall height and 3 1/4 in wide, the smooth black protector lies flat without creating a steep ramp. Rated at 440 lb per axle, it suits foot traffic and occasional light rolling loads. The unslit rubber can be slit on site to fit existing cables.

One channel limits capacity to a single cable

Only one cable fits inside the 1 in by 3/4 in channel, so installations needing multiple separated conductors require additional protectors or a wider multi-channel model. The unit is not ADA compliant, so it does not meet accessible-path requirements.

Highlights

  • Protects cables up to 3/4 in. diameter with a single 1 in. wide channel
  • Handles 440 lb per axle load for heavy vehicle traffic
  • Links multiple sections together using built-in connector pins
  • Ten-foot rubber length covers long cable runs in one piece
  • Supplied unslit so you choose where to open the channel

Specifications

BrandCHECKERS
TypeCable Management & Conduit

Questions about this item

How do I connect multiple 10 ft sections using the linkable pins?

Align the built-in pins on one section with the sockets on the next and press firmly until they lock; the step people miss is cleaning debris from the pin channels first so the connection seats fully.

Will the rubber surface need treatment to stay flexible outdoors?

The rubber is supplied ready to use; periodic washing with mild soap and water removes grit that can accelerate surface cracking, and no additional coating is required.

At what load does the 440 lb per axle rating become the limiting factor during continuous traffic?

The 440 lb per axle rating is the structural limit; sustained loads at or above that level will deform the channel walls before any other wear appears.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.