Peerless Industrial Group
Peerless Industrial Group Tire Chains Single Bus & RV V-Bar PK2 QG2821
$67.99
0.00081482BTC
In stock
chaomin
chaomin HZ6000 1000W 6000W peak pure sine wave portable power
Converts 12V or 24V DC battery power to 110V AC with 1000W continuous and 6000W peak pure sine wave output
- TypePower Inverters
- FeaturesModel: HZ6000 Name: Pure sine wave power inverter Input volt
- Clean AC power for sensitive electronics from pure sine wave output
- 1000 W continuous rating runs household appliances off a 12 V or 24 V battery
- 6000 W surge capacity starts high-draw tools and compressors
- LED voltage screen shows real-time battery level to prevent deep discharge
- Eight protection circuits guard against reverse polarity, overload and over-temperature
Power inverter for 12 V and 24 V vehicles
The Chaomin HZ6000 converts 12 V or 24 V DC battery power into 110 V AC at 60 Hz. It delivers 1000 W of continuous pure sine wave output with a 6000 W surge rating for short peaks. An LED display shows real-time input voltage and a built-in work light adds convenience. The unit weighs 1.6 kg and measures 28.6 × 10.3 × 6 cm.
Suits owners who need clean 110 V power
Ideal for running TVs, small appliances or tools that require true sine wave output up to 1000 W continuous. Not for users who need more than one AC outlet or continuous power above 1000 W. Builders planning high-draw loads such as large air conditioners or welders should look at higher-rated units.
Rated 1000 W continuous with 6000 W peak
This single figure decides whether the inverter can handle your load. Check the wattage of each device you intend to run; the total must stay at or below 1000 W for sustained operation. The 6000 W surge covers brief start-up spikes only.
Highlights
- Clean AC power for sensitive electronics from pure sine wave output
- 1000 W continuous rating runs household appliances off a 12 V or 24 V battery
- 6000 W surge capacity starts high-draw tools and compressors
- LED voltage screen shows real-time battery level to prevent deep discharge
- Eight protection circuits guard against reverse polarity, overload and over-temperature
Specifications
| Brand | chaomin |
|---|---|
| Model | HZ-6000W |
| Type | Power Inverters |
| Features | Model: HZ6000 Name: Pure sine wave power inverter Input voltage: DC 12V/24V for your choice Output voltage : AC 110V Output frequency: 60Hz Peaks Power : 6000W Rated power: 1000W Weight: 1.6kg Product size: 28.6X10.3X6cm Maximum Active Surge Rating (less than 1 second) :6000W Maximum AC Current per socket : 8.33Ampere Output Waveform: True/pure sine wave (<3% THD) Efficiency: 90=% No Load Current Draw (DC side) <0.6 A |
Questions about this item
What AC output does the 110V pure sine wave inverter provide, and what continuous load does the 1000W rating cap in practice?
The inverter delivers AC 110V at 60Hz with a true sine wave. Its 1000W continuous rating caps the total connected load; the single socket can supply up to 8.33A before overload protection trips.
What are the physical dimensions and mounting requirements for the 28.6×10.3×6cm aluminium housing?
The unit measures 28.6 cm long, 10.3 cm wide and 6 cm high, weighing 1.6 kg. Its aluminium alloy case has no built-in brackets, so it must rest on a flat, ventilated surface or be secured with external straps.
How is the HZ6000 connected to a 12V or 24V battery, and which step do installers often reverse?
Attach the supplied battery clips — red to positive, black to negative — matching the chosen 12V (9.8–15V) or 24V (20–28V) input range. The step often reversed is connecting the clips to the battery before confirming the inverter’s DC voltage selector matches the battery bank.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
