chaomin
chaomin HZ4000 800 W 12/24 V pure sine wave power inverter
Converts 12V or 24V DC battery power into 110V AC household current with 800W continuous and 4000W surge output
- TypePower Inverters
- FeaturesModel: HZ4000 Name: Pure sine wave power inverter Input volt
- Pure sine wave output protects sensitive electronics with 800 W continuous power
- 4000 W surge capacity starts demanding appliances like microwaves and air conditioners
- LED display shows real-time battery voltage to prevent unexpected shutdowns
- Multi-protection design guards against overload, short circuit and overheating
- Compact 1.4 kg unit runs from 12 V or 24 V vehicle batteries
What it is
The chaomin HZ4000 is a pure sine wave power inverter that converts 12V or 24V DC battery power into 110V AC at 60Hz. It delivers 800W of continuous output with a 4000W surge rating for short starts. An LED screen shows real-time input voltage and warns when the battery runs low. Eight protection circuits guard against reverse polarity, over-voltage, under-voltage, overload, short circuit, over-temperature, over-current and internal fuse failure.
Capacity and headroom
Continuous load is limited to 800W, so the unit comfortably runs televisions, small refrigerators, microwave ovens and similar appliances that stay within that envelope. The 4000W peak lasts less than one second and covers motor start-up surges. Each AC socket supplies up to 8.33A. Efficiency is rated at 90%. The inverter shuts down if the DC input falls outside the safe ranges of 9.8–15V for 12V systems or 20–28V for 24V systems, protecting both battery and hardware.
Upgrade path
This model replaces a modified sine wave inverter when sensitive electronics such as medical devices, variable-speed motors or audio equipment require a clean waveform. It also steps up from lower-wattage pure sine units when the load regularly exceeds their continuous rating but stays below 800W. The jump is worthwhile when the application needs both pure sine quality and the 4000W surge headroom for heavy starts, and when the installation can use either a 12V or 24V battery bank.
Highlights
- Pure sine wave output protects sensitive electronics with 800 W continuous power
- 4000 W surge capacity starts demanding appliances like microwaves and air conditioners
- LED display shows real-time battery voltage to prevent unexpected shutdowns
- Multi-protection design guards against overload, short circuit and overheating
- Compact 1.4 kg unit runs from 12 V or 24 V vehicle batteries
Specifications
| Brand | chaomin |
|---|---|
| Model | HZ-4000W |
| Type | Power Inverters |
| Features | Model: HZ4000 Name: Pure sine wave power inverter Input voltage: DC 12V/24V for your choice Output voltage: AC110V Output frequency: 60Hz Peaks Power : 4000W Rated power: 800W Weight: 1.4 kg Product size: 24.5X10.3X6cm Maximum Active Surge Rating (less than 1 second) :4000W Maximum AC Current per socket :8.33Ampere Output Waveform: True/pure sine wave (<3% THD) Efficiency: 90=% No Load Current Draw (DC side) <0.6 A |
Questions about this item
Will this 800 W inverter run alongside my existing 12 V car battery without draining it too fast?
The unit draws power only when appliances are connected. Idle current is low, and the LED display shows real-time input voltage so you can monitor the battery state while the inverter is running.
How can I verify the HZ4000 is delivering clean 110 V 60 Hz power after I hook it up?
The built-in LED screen reports the DC input voltage live. If the reading stays within the 9.8–15 V range for 12 V or 20–28 V for 24 V, the inverter is operating in its safe window and the pure sine wave output is active.
Which cables come in the box and what else must I provide to connect the inverter to a battery?
The package includes the inverter, two battery clips and a user manual. You will need a suitable 12 V or 24 V battery and wiring rated for the 800 W continuous load.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



