We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green USB-C test boards with 24-pin male and female connectors on FR-4 PCB

Cermant USB 3.1 Type-C Male to Female 24P Test Board 2pcs

SKU CH-1EZG-4HFYY

A 24-pin USB 3.1 Type-C male-to-female breakout board pair on FR-4 with 2.54 mm pitch headers for cable testing and DIY prototyping

  • TypeUSB Type C
  • ColorGreen
  • Changer TypeUSB Type C
  • SpecificationsKeyboard
  • Connector AUSB Type C
  • Connector BUSB Type C
  • Supports 10 Gbps data throughput via USB 3.1 standard
  • 24-pin layout exposes every Type-C signal for test access
  • Green FR-4 board with 2.54 mm pin pitch suits breadboard prototyping
  • Two boards included so one can stay in-circuit while another is spare
  • Rated for 3 A current handling on power pins

USB 3.1 Type-C 24-pin test board

This pair of Cermant boards converts a USB 3.1 Type-C male plug into a female socket with a 24-pin header for probing. Engineers and hobbyists use them to access every line during cable validation, prototype bring-up or DIY electronics work.

Sustained 10 Gbps signal path

The FR-4 glass-fibre PCB with green-oil spray-tin finish maintains the USB 3.1 10 Gbps rate across the 20 × 36 mm board area. Vertical 2.54 mm pitch pins rated at 3 A carry power and data without the signal degradation that occurs on flying-lead adapters during long test sessions.

Check pin pitch and aperture fit

Verify that your test fixture accepts 2.54 mm pin pitch and 1.0 mm aperture holes before ordering. The 0.8 mm board thickness and 42 × 36 mm overall footprint must clear surrounding components, and the vertical pin direction requires top-side access on the target PCB.

Highlights

  • Supports 10 Gbps data throughput via USB 3.1 standard
  • 24-pin layout exposes every Type-C signal for test access
  • Green FR-4 board with 2.54 mm pin pitch suits breadboard prototyping
  • Two boards included so one can stay in-circuit while another is spare
  • Rated for 3 A current handling on power pins

Specifications

BrandCermant
Part NumberCelent_CL574
TypeUSB Type C
ColorGreen
Changer TypeUSB Type C
SpecificationsKeyboard
Connector AUSB Type C
Connector BUSB Type C
FeaturesElectronic

Questions about this item

Does the 24-pin test board draw any power or generate heat when left connected all day?

The board is a passive breakout with no active components, so it adds no measurable power draw or heat while connected.

What must I already have to use the 2.54 mm pin-header sockets on this test board?

You need standard 2.54 mm jumper wires or a matching header connector to access the exposed pins.

Will the 10 Gbps USB 3.1 rating work with my older USB 2.0 Type-C cables and ports?

Yes, the connector is fully backward-compatible and will operate at USB 2.0 speeds with legacy cables and ports.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.