We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 50-foot 12-gauge SJTW extension cord with triple-tap connector

CENTURY

CENTURY 50' 12/3 SJTW Triple Tap Extension Cord

SKU CH-T19X-7B5JG

A 50-foot 12-gauge SJTW cord with triple 15A-125V outlets stays flexible in freezing temperatures

  • Triple tap lets you run three tools from one cord
  • 12-gauge copper conductors deliver 15 A at 125 V
  • 50 ft length reaches across large job sites
  • Cold-weather jacket stays flexible below freezing
  • Molded strain reliefs keep plugs secure under heavy use

50-foot 12/3 SJTW extension cord

This 50-foot contractor-grade extension cord uses 12-gauge copper conductors and a triple-tap connector with three 15A-125V outlets. It is built for professionals and hobbyists who need to run multiple tools or small appliances from a single power source. The heavy-duty plugs feature molded strain reliefs that prevent the cord ends from pulling loose during use.

Cold-weather flexibility and 12-gauge capacity

The SJTW jacket stays flexible in sub-freezing temperatures, so the cord will not stiffen or crack on winter job sites. A 12-gauge conductor limits voltage drop over the 50-foot length, but it still caps continuous load at 15 amps. Users drawing near that limit on long runs should expect some voltage loss compared with shorter or heavier-gauge cords.

Triple-tap outlet count

The single specification that decides fit is the three-outlet triple tap: if the job only needs one or two connections, a single-tap cord is lighter and cheaper; if four or more tools must run simultaneously, this cord cannot supply enough outlets without adding a power strip.

Highlights

  • Triple tap lets you run three tools from one cord
  • 12-gauge copper conductors deliver 15 A at 125 V
  • 50 ft length reaches across large job sites
  • Cold-weather jacket stays flexible below freezing
  • Molded strain reliefs keep plugs secure under heavy use

Specifications

No published specifications for this item yet.

Questions about this item

Should I choose the 12 gauge 50 foot version or a different gauge for my tools?

The 12 gauge 50 foot cord handles higher current with less voltage drop than thinner gauges, making it suitable for demanding tools and appliances at this length.

What does the 15 amp rating mean when I plug in multiple tools?

The triple tap provides three outlets sharing a 15 amp 125 volt limit, so the combined draw of all connected tools must stay at or below 15 amps.

How does the SJTW rating affect where I can use this cord?

SJTW means the cord has a thermoplastic jacket rated for hard service, outdoor use, and wet locations, so it is built for jobsite and cold-weather conditions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.