Centenex Electronics
Centenex Electronics DS-CS-OPH981BL barcode scanner battery 3.7V 1000mAh Li-ion black
3.7 V 1000 mAh lithium-ion replacement battery powers Opticon OPL-9714, OPL-9715, OPL-9725, OPL-9727, OPL-9815 and PHL-1300 scanners
- Compatible with Opticon N10-1000MA scanners
- 1000 mAh capacity for extended scanning sessions
- 7 V Li-ion chemistry for stable power output
- Slim 53.17 x 35.35 x 6.84 mm profile fits battery bay
- Black finish matches original device aesthetics
Replacement battery for Opticon scanners
The Centenex Electronics DS-CS-OPH981BL is a 3.7V 1000mAh lithium-ion cell built to replace the Opticon N10-1000MA pack. It fits the OPL-9714, OPL-9715, OPL-9725, OPL-9727, OPL-9815 and PHL-1300 handheld units. The black housing measures 53.17 x 35.35 x 6.84 mm. Ships new and ready to install.
Voltage and capacity match the original pack
At 3.7 volts and 1000 mAh the cell delivers the same 3.70 Wh rating as the factory battery. That exact electrical match is the single figure that decides whether the scanner will recognise the pack and charge it correctly. A different voltage or capacity would prevent proper operation.
Runs a full shift on one charge
The 1000 mAh capacity comfortably powers a typical barcode scanner through a standard work shift of continuous scanning. Heavy trigger use or cold environments will drain the cell faster, so operators running back-to-back shifts should plan a mid-day swap or keep a spare charged.
Highlights
- Compatible with Opticon N10-1000MA scanners
- 1000 mAh capacity for extended scanning sessions
- 7 V Li-ion chemistry for stable power output
- Slim 53.17 x 35.35 x 6.84 mm profile fits battery bay
- Black finish matches original device aesthetics
Specifications
| Brand | Centenex Electronics |
|---|---|
| Model | DS-CS-OPH981BL |
Questions about this item
What runtime does the 1000 mAh capacity provide in an Opticon scanner?
The 1000 mAh rating means the cell can supply one ampere for one hour; actual runtime depends on the scanner's current draw, which varies by model and usage pattern.
Does the battery use a proprietary connector or a standard interface for the Opticon models listed?
It is built as a direct replacement for Opticon part N10-1000MA and fits the OPL-9714, OPL-9715, OPL-9725, OPL-9727, OPL-9815 and PHL-1300 without adapters.
Will the 53.17 x 35.35 x 6.84 mm pack fit the battery compartment of an OPL-9725?
Yes, those are the exact dimensions of the original Opticon N10-1000MA cell, so it seats correctly in every listed device including the OPL-9725.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



