We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular lithium-ion battery with flat profile and connector edge

Centenex Electronics

Centenex Electronics DS-CS-MC100BL barcode scanner battery 1.8 Ah 3.7 V 1800 mAh 6.66 Wh Li-ion black

SKU CH-M230-14ZX8 MPN DS-CS-MC100BL

Lithium-ion replacement battery delivering 1.8 Ah at 3.7 V for Symbol MC1000, Intermec CK1 and Wasp WDT3200 series scanners

  • Powers Symbol MC1000 and Intermec CK1 scanners reliably
  • 1800 mAh lithium-ion cell delivers 6.66 Wh runtime
  • Replaces OEM part 074337S and BTRY-MC10EAB00 exactly
  • Compact 53.00 x 35.30 x 11.00 mm fits original bay
  • Brand-new condition ensures full 100 % OEM compatibility

Compatible Replacement Battery

This Centenex Electronics DS-CS-MC100BL battery replaces the original power pack for Symbol MC1000, Intermec CK1 and CN1, and Wasp WDT3200 series scanners. It matches the OEM part numbers 074337S, 73659, BTRY-MC10EAB00 and 633808920326 so the device recognises it immediately. The 1.8 Ah lithium-ion cell delivers 6.66 Wh at 3.7 V. It is supplied new and ready for deployment in warehouse or retail fleets.

Thermals and Daily Power Draw

Lithium-ion chemistry keeps self-discharge low during shift changes and standby periods. The 1800 mAh capacity supports a full day of typical scan intensity without requiring a mid-shift swap. No active cooling is needed; the cell runs at ambient temperature inside the scanner housing. Normal charge cycles complete through the device cradle or dedicated charger.

Sustained Load Behaviour

Under continuous scanning the voltage curve remains stable until the final 10 % of capacity. The pack does not exhibit sudden voltage sag that would trigger early low-battery alerts. After deep discharge the cell recovers full capacity on the next standard charge cycle. It is not suited for scanners that demand higher ampere-hour ratings or a different form factor.

Highlights

  • Powers Symbol MC1000 and Intermec CK1 scanners reliably
  • 1800 mAh lithium-ion cell delivers 6.66 Wh runtime
  • Replaces OEM part 074337S and BTRY-MC10EAB00 exactly
  • Compact 53.00 x 35.30 x 11.00 mm fits original bay
  • Brand-new condition ensures full 100 % OEM compatibility

Specifications

BrandCentenex Electronics
ModelDS-CS-MC100BL

Questions about this item

How do I install the DS-CS-MC100BL battery in my Symbol MC1000, and what step is often missed?

Power off the device, remove the battery latch, insert the pack with the contacts facing the scanner, then press firmly until the latch clicks; the step often missed is verifying the click before closing the compartment.

What maintenance will this 1800 mAh Li-ion pack need later?

No scheduled maintenance is required; store at roughly half charge if unused for weeks, keep contacts clean, and replace the pack when operating time becomes too short for your workflow.

What limit appears first during a long scanning shift with this 6.66 Wh battery?

The 1800 mAh capacity sets the runtime ceiling; under continuous scanning the pack will reach empty before any thermal or voltage limit is hit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.