Centenex Electronics
Centenex Electronics DS-CS-ICN200BL barcode scanner battery 3.7V 1800mAh
Replacement lithium-ion battery delivers 3.7 V and 1.8 Ah capacity for Intermec CN2 barcode scanners
- Reliable power for Intermec CN2 scanners with 3.7V 1800mAh Li-ion cell
- Extended scanning sessions backed by 6.66Wh energy capacity
- Direct replacement for OEM part numbers 074201-004 and 203-778-001
- Compact 54.30 x 52.80 x 17.20 mm form factor fits original battery bay
- Brand-new condition ensures 100% OEM compatibility out of the box
Compatible replacement battery
The Centenex Electronics DS-CS-ICN200BL is a lithium-ion power cell built for Intermec CN2 barcode scanners. It replaces OEM part numbers 074201-004 and 203-778-001 with a direct-fit design. The pack delivers 3.7 volts and 1800 milliampere-hours in a black housing.
Capacity and runtime limits
A 1.8 ampere-hour rating at 3.7 volts yields 6.66 watt-hours of stored energy. That capacity sets the practical ceiling for continuous scanning sessions before a recharge is required. Heavy use or cold environments will reduce the effective runtime below the nominal figure.
Upgrading from depleted packs
The unit swaps into the CN2 without tools and restores original run time when the factory cell no longer holds a charge. It is not a higher-capacity upgrade and will not extend shifts beyond the scanner's original specification. Buyers needing longer operation per charge should look for an extended-capacity alternative.
Highlights
- Reliable power for Intermec CN2 scanners with 3.7V 1800mAh Li-ion cell
- Extended scanning sessions backed by 6.66Wh energy capacity
- Direct replacement for OEM part numbers 074201-004 and 203-778-001
- Compact 54.30 x 52.80 x 17.20 mm form factor fits original battery bay
- Brand-new condition ensures 100% OEM compatibility out of the box
Specifications
| Brand | Centenex Electronics |
|---|---|
| Model | DS-CS-ICN200BL |
Questions about this item
Which capacity should I choose for the Intermec CN2?
This battery is supplied as a single 1.8 Ah cell rated at 3.7 V and 6.66 Wh, matching the original 074201-004 specification.
What does the 1800 mAh rating mean when the scanner is in use?
The 1800 mAh capacity typically delivers a full shift of scanning on the CN2 before needing a recharge.
What interface does the battery use and what does it limit?
It connects through the CN2's proprietary battery contacts, so only Intermec CN2 and compatible models can use it.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



