Centenex Electronics
Centenex Electronics DS-CS-ICK300BX barcode scanner battery 5200mAh
Replacement lithium-ion battery delivers 5200 mAh capacity for Intermec CK3-series scanners
- Long runtime from 5200 mAh lithium-ion cell
- Direct replacement for Intermec 318-033-001 and 318-034-001
- Fits CK3, CK3A, CK3C, CK3R, CK3X and AB17/AB18 packs
- 100 % OEM compatible in black finish
- Compact 90.09 × 41.91 × 24.80 mm profile
Compatible Intermec Handheld Battery
This Centenex Electronics DS-CS-ICK300BX is a new lithium-ion replacement battery rated at 5200 mAh and 3.7 V for Intermec CK3 series mobile computers. It matches the original 318-033-001 and 318-034-001 part numbers and delivers 19.24 Wh of capacity in a black housing measuring 90.09 x 41.91 x 24.80 mm.
Suits CK3 CK3A CK3C CK3R CK3X owners
Workers needing a direct drop-in power source for the listed Intermec terminals will find this unit fits the battery compartment and connector without modification. Buyers who use other handheld models or require a different voltage or chemistry should look elsewhere because this pack is built specifically for the CK3 family.
Capacity 5.2 Ah 19.24 Wh decides fit
The single specification that determines compatibility is the 5.2 Ah rating at 3.7 V, which equals 19.24 Wh and matches the OEM 318-033-001 and AB17 AB18 cells. If your device calls for that exact energy rating and the physical dimensions shown, this battery will work; otherwise it will not.
Highlights
- Long runtime from 5200 mAh lithium-ion cell
- Direct replacement for Intermec 318-033-001 and 318-034-001
- Fits CK3, CK3A, CK3C, CK3R, CK3X and AB17/AB18 packs
- 100 % OEM compatible in black finish
- Compact 90.09 × 41.91 × 24.80 mm profile
Specifications
| Brand | Centenex Electronics |
|---|---|
| Model | DS-CS-ICK300BX |
Questions about this item
Will the 90.09 x 41.91 x 24.80 mm battery fit my CK3X scanner?
The pack measures 90.09 by 41.91 by 24.80 mm, matching the original Intermec 318-033-001 form factor for CK3, CK3A, CK3C, CK3C1, CK3N, CK3N1, CK3R and CK3X units.
How do I install the 5200 mAh Li-ion pack without damaging the contacts?
Power off the scanner, slide the old pack out, align the new battery's connector pins with the compartment, press firmly until it clicks, then power on — forcing it in upside-down bends the pins.
When should I replace the 3.7 V 19.24 Wh battery?
Replace it when a full charge no longer lasts a typical shift or the scanner reports low capacity; the Li-ion chemistry is rated for hundreds of cycles before runtime drops noticeably.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



