We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular lithium-ion battery pack with smooth matte finish, labelled 4400mAh 3.7V

Centenex Electronics

Centenex Electronics DS-CS-DAX300BL barcode scanner battery 4400mAh 3.7V Li-ion black

SKU CH-F813-EJ5ZC MPN DS-CS-DAX300BL

Li-ion battery for Datalogic Falcon X3, X3+ and X4 scanners, 4400 mAh at 3.7 V

  • 4400 mAh capacity keeps scanners running longer
  • 7 V 16.28 Wh rating matches original power specs
  • Li-ion chemistry gives reliable recharge cycles
  • Fits Datalogic Falcon X3, X3+ and X4 models
  • Replaces OEM part numbers 94ACC1386 and BT-26

Compatible Datalogic Models

This battery fits the Datalogic Falcon X3, X3+ and X4 handheld scanners. It replaces the original 94ACC1386 and BT-26 packs. Workers who rely on these specific terminals for inventory or retail tasks will find a direct power source here.

Capacity and Voltage

The cell delivers 3.7 volts and 4400 milliampere hours for 16.28 watt hours of energy. That single figure determines whether a shift can run without a mid-day swap. Buyers who need a higher capacity than 4.4 ampere hours cannot use this pack.

Installation Notes

The battery slides into the Falcon battery compartment and locks with the existing latch. No tools or soldering are required. The only common issue is seating the pack fully so the contacts align; a loose fit causes intermittent power loss.

Highlights

  • 4400 mAh capacity keeps scanners running longer
  • 7 V 16.28 Wh rating matches original power specs
  • Li-ion chemistry gives reliable recharge cycles
  • Fits Datalogic Falcon X3, X3+ and X4 models
  • Replaces OEM part numbers 94ACC1386 and BT-26

Specifications

BrandCentenex Electronics
ModelDS-CS-DAX300BL

Questions about this item

How long will the 4400 mAh capacity actually power a Datalogic Falcon X4 during a shift?

The 4400 mAh cell delivers 16.28 Wh at 3.7 V, which typically provides a full day of scanning on Falcon X3, X3+ and X4 units before needing a recharge.

Does the BT-26 battery use a standard connector that fits the Falcon X3+ without modification?

Yes, it is built to the 94ACC1386 / BT-26 form factor so it slots directly into Falcon X3, X3+ and X4 handsets with no adapter required.

Will the 78.26 × 41.16 × 24.55 mm pack fit the existing battery compartment on a Falcon X4?

Those exact dimensions match the OEM cavity, so the pack sits flush and the latch closes normally on Falcon X3, X3+ and X4 models.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.