Centenex Electronics
Centenex Electronics DS-CS-DAX300BH barcode scanner battery 6.8Ah
Li-ion battery delivers 6.8 Ah capacity for Datalogic Falcon X3, X3+ and X4 scanners
- 8 Ah Li-ion capacity keeps Datalogic Falcon X3, X3+ and X4 scanners running longer
- Replaces OEM part numbers 94ACC1386, BT-26, 945250035 and G17120700 for direct compatibility
- 16 Wh energy rating at 3.7 V delivers reliable power for high-volume scanning shifts
- Compact 78.26 × 41.16 × 24.55 mm black pack fits the original battery bay without modification
- Brand-new Centenex Electronics unit built to 100 % OEM specification for drop-in replacement
Purpose-Built Replacement
This Centenex Electronics battery replaces the Datalogic BT-26 pack used in Falcon X3, X3+ and X4 barcode scanners. It delivers 6.8 Ah at 3.7 V for 25.16 Wh of lithium-ion capacity in a black housing.
When the Upgrade Pays Off
The jump from a depleted original cell is worth it when scan sessions end early or the scanner shuts down mid-shift. A fresh 6800 mAh pack restores full-day runtime for warehouse, retail and logistics workflows that rely on continuous scanning.
Drop-In Install, Watch Polarity
Installation is a simple battery-door swap with no tools required. The only common mistake is reversing the connector orientation; align the keyed plug before pressing it home to avoid a no-power condition.
Highlights
- 8 Ah Li-ion capacity keeps Datalogic Falcon X3, X3+ and X4 scanners running longer
- Replaces OEM part numbers 94ACC1386, BT-26, 945250035 and G17120700 for direct compatibility
- 16 Wh energy rating at 3.7 V delivers reliable power for high-volume scanning shifts
- Compact 78.26 × 41.16 × 24.55 mm black pack fits the original battery bay without modification
- Brand-new Centenex Electronics unit built to 100 % OEM specification for drop-in replacement
Specifications
| Brand | Centenex Electronics |
|---|---|
| Model | DS-CS-DAX300BH |
Questions about this item
Will the 78.26 x 41.16 x 24.55 mm battery fit the Falcon X3 battery compartment?
The battery matches the 78.26 x 41.16 x 24.55 mm dimensions specified for the Falcon X3, X3+ and X4 battery bay.
How do I install the DS-CS-DAX300BH and what step is often missed?
Power off the scanner, slide the battery into the compartment until the latch clicks, then charge fully before first use; the missed step is the initial full charge.
When will the 6.8 Ah Li-ion pack need replacing?
After roughly 300 to 500 full charge cycles the 6.8 Ah capacity drops below 80 %, so plan a replacement when run time noticeably shortens.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



