Centenex Electronics
Centenex Electronics DS-CS-DAM213BL barcode scanner battery 3.7V 750mAh Li-ion green
Replacement lithium-ion battery delivers 3.7 V and 750 mAh for Datalogic QuickScan and Metrologic SP5500 scanners
- Direct replacement for Datalogic 128000790 battery
- 7 V 750 mAh lithium-ion cell delivers 2.78 Wh
- Compact 52.00 x 14.60 x 14.60 mm form factor fits scanner bay
- Green housing matches original equipment colour coding
- Brand new unit with 100 % OEM compatibility
Replacement Battery for Datalogic Scanners
This 3.7V 750mAh lithium-ion cell replaces the original BT-7 pack used in QuickScan QM2100, QM2130 and Metrologic SP5500 units. It matches the 128000790, 128000791 and 90ACC1945 part numbers and supplies 2.78Wh of capacity. The green housing measures 52.00 x 14.60 x 14.60 mm and is sold as a single new unit.
Upgrading from a Depleted Pack
Swap this cell when the original battery no longer holds a full shift charge or shows swollen casing. The jump is worth it if the scanner still reads cleanly but dies before the end of the day. It restores the factory runtime without changing the device firmware or charging cradle.
Simple Slide-In Installation
The pack slides into the scanner battery bay and clicks into the existing connector; no soldering or tools are required. What usually goes wrong is forcing the cell in reversed — align the contacts with the bay guides before pressing. Charge fully on the standard cradle before first use.
Highlights
- Direct replacement for Datalogic 128000790 battery
- 7 V 750 mAh lithium-ion cell delivers 2.78 Wh
- Compact 52.00 x 14.60 x 14.60 mm form factor fits scanner bay
- Green housing matches original equipment colour coding
- Brand new unit with 100 % OEM compatibility
Specifications
| Brand | Centenex Electronics |
|---|---|
| Model | DS-CS-DAM213BL |
Questions about this item
What are the exact dimensions of the DS-CS-DAM213BL battery so I can confirm it fits my scanner?
The battery measures 52.00 x 14.60 x 14.60 mm, matching the original Datalogic BT-7 form factor for the listed QuickScan and Metrologic models.
How do I install the replacement battery in a QuickScan QM2130, and what step is often missed?
Remove the scanner's battery cover, disconnect the old pack, connect the new DS-CS-DAM213BL connector firmly until it clicks, then replace the cover and charge fully before first use.
When will the 3.7V 750mAh Li-ion pack need replacing under normal use?
The 0.75 Ah cell is rated for hundreds of charge cycles; plan replacement when runtime falls below 80 % of new capacity, typically after one to two years of daily scanning shifts.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



