Centenex Electronics
Centenex Electronics DS-CS-CLB930BL barcode scanner battery 2.9 Ah Li-ion black
Li-ion replacement battery delivering 2.9 Ah capacity for CipherLab 9300, 9400, 9600 and CPT series scanners
- Li-ion chemistry provides 2.9 Ah capacity for extended scanning sessions
- 7 V 2900 mAh rating delivers 10.73 Wh of reliable power
- Fits CipherLab 9300 9400 9600 and CPT series devices directly
- Replaces OEM part numbers BA-0012A7 and 96-BP without modification
- Compact 65.30 x 37.50 x 16.70 mm black housing installs in seconds
Replacement Battery for CipherLab 9300 9400 9600
This Centenex Electronics DS-CS-CLB930BL is a lithium-ion power cell built for CipherLab barcode scanners including the 9300, 9400, 9600 and CPT variants. It delivers a 2.9 Ah capacity at 3.7 V for 10.73 Wh of energy in a black housing measuring 65.30 x 37.50 x 16.70 mm. The pack is brand new and fully OEM compatible.
Upgrade from Worn Original BA-0012A7
It replaces the original BA-0012A7 or 96-BP battery when runtime has dropped or the cell no longer holds charge. The jump is worth it when a scanner shuts down mid-shift or requires constant docking, restoring full mobility for inventory, retail or logistics workflows.
Limits of Single-Cell Li-ion Chemistry
A single 3.7 V lithium-ion cell cannot supply higher voltages needed by some peripherals and its capacity is fixed at 2900 mAh. Extended shifts beyond one full charge will need a spare pack or a charging cradle, and the cell will gradually lose capacity over repeated cycles.
Highlights
- Li-ion chemistry provides 2.9 Ah capacity for extended scanning sessions
- 7 V 2900 mAh rating delivers 10.73 Wh of reliable power
- Fits CipherLab 9300 9400 9600 and CPT series devices directly
- Replaces OEM part numbers BA-0012A7 and 96-BP without modification
- Compact 65.30 x 37.50 x 16.70 mm black housing installs in seconds
Specifications
| Brand | Centenex Electronics |
|---|---|
| Model | DS-CS-CLB930BL |
Questions about this item
What are the physical dimensions of this battery so I can confirm it fits my CipherLab 9600?
The battery measures 65.30 x 37.50 x 16.70 mm and is designed as a direct replacement for the CipherLab BA-0012A7 and 96-BP packs used in the 9300, 9400 and 9600 series.
How do I install this Li-ion pack in my CipherLab 9400, and what step is commonly missed?
Power off the scanner, open the battery compartment, insert the pack with the contacts facing the device terminals, then close the latch fully; the step often missed is ensuring the latch clicks audibly so the pack stays seated during drops.
When will this 2.9 Ah battery need replacing, and what should I look for?
Replace the pack when a full charge no longer lasts a typical shift or the scanner reports low capacity; the black Li-ion cell is rated at 10.73 Wh and 2900 mAh at 3.7 V.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



