Centenex Electronics
Centenex Electronics DS-CS-CLB156BL barcode scanner battery 3.7V 700mAh Li-ion black
Replacement Li-ion battery for CipherLab 1560, 1562 and 1564 scanners, 3.7 V 700 mAh
- Li-ion chemistry delivers reliable power for CipherLab scanners
- 7 V 700 mAh capacity supports extended scanning sessions
- Fits CipherLab 1560 1562 1564 models directly
- Replaces original BA-001800 and KB1A371802963 packs
- Compact 75.00 x 20.84 x 18.53 mm design installs easily
Compatible replacement battery
The Centenex Electronics DS-CS-CLB156BL is a lithium-ion battery built for CipherLab 1560, 1562 and 1564 barcode scanners. It replaces original part numbers BA-001800 and KB1A371802963 with 100 percent OEM compatibility. Operations teams can swap the pack without tools and restore full mobile scanning capability. The black housing matches the scanner aesthetics.
Thermal and power profile
The 3.7 V, 700 mAh cell stores 2.59 Wh and fits within a 75.00 by 20.84 by 18.53 mm footprint. Lithium-ion chemistry delivers steady voltage during long shifts and generates minimal heat inside the scanner grip. No active cooling is required and the pack adds negligible weight to the device. Normal charging cycles complete without audible noise.
Upgrade context
This pack suits fleets replacing swollen or end-of-life originals in the listed CipherLab models. It is not intended for scanners outside the 1560, 1562 or 1564 series or for devices requiring a different voltage or connector. Teams standardising on a single spare SKU across those three models will simplify inventory. Buyers needing higher capacity for multi-shift coverage should verify the scanner firmware supports larger packs.
Highlights
- Li-ion chemistry delivers reliable power for CipherLab scanners
- 7 V 700 mAh capacity supports extended scanning sessions
- Fits CipherLab 1560 1562 1564 models directly
- Replaces original BA-001800 and KB1A371802963 packs
- Compact 75.00 x 20.84 x 18.53 mm design installs easily
Specifications
| Brand | Centenex Electronics |
|---|---|
| Model | DS-CS-CLB156BL |
Questions about this item
How do I install the DS-CS-CLB156BL battery into my CipherLab 1560 scanner without damaging the contacts?
Power off the device, open the battery compartment, align the 75.00 x 20.84 x 18.53 mm pack with the polarity markers, press firmly until the latch clicks, then power on to verify the 3.7V 700mAh cell is recognised.
What maintenance does the 3.7V 700mAh Li-ion pack need and when should I replace it?
Keep the battery at room temperature, avoid full discharges, and recharge before storage; replace the pack when operating time no longer covers a full shift.
What is the first limit I will hit when scanning continuously with the 2.59Wh battery?
The 700mAh capacity will deplete first, ending the session until the pack is recharged.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



