Centenex Electronics
Centenex Electronics 2 Pack Battery for Logitech Harmony 1100 1100i 915
Two lithium-polymer batteries rated at 1.3 Ah and 3.7 V fit Logitech Harmony 1100, 1100i, 915 and related remotes
- TypeHome Electronics Battery
- Two-pack keeps a spare ready for continuous control
- 1300 mAh lithium-polymer cells deliver lasting runtime
- Direct fit for Harmony 1000, 1100, 1100i, 915 and Squeezebox Duet
- Replaces Logitech L-LU18 and 190582-0000 without modification
- Slim 54.8 × 35.5 × 7 mm profile slides into the battery bay
Two-Pack Replacement Battery
This two-pack supplies direct replacements for Logitech Harmony 1000, 1100, 1100i and 915 remotes plus the Squeezebox Duet controller. Each cell matches the original L-LU18 and 190582-0000 part numbers so the remote recognises the battery without further setup. The pack suits owners who need a spare on hand or whose original cells no longer hold a useful charge.
Thermals, Noise and Power Draw
Lithium-polymer chemistry runs cool during the low-current draw of a remote, so the handset stays at room temperature in normal use. There are no moving parts, therefore the batteries add no audible noise. Each cell delivers 3.7 volts and 4.81 watt-hours, matching the factory energy specification exactly.
Capacity Decides Fit
Capacity is 1300 milliampere-hours per cell; this is the single figure that determines whether the runtime matches the original Logitech specification. Buyers whose remotes require a different milliampere-hour rating will not get the expected operating time from this pack.
Highlights
- Two-pack keeps a spare ready for continuous control
- 1300 mAh lithium-polymer cells deliver lasting runtime
- Direct fit for Harmony 1000, 1100, 1100i, 915 and Squeezebox Duet
- Replaces Logitech L-LU18 and 190582-0000 without modification
- Slim 54.8 × 35.5 × 7 mm profile slides into the battery bay
Specifications
| Brand | Centenex Electronics |
|---|---|
| Model | AS-BALOGI-HARMNY-1100-2 |
| Type | Home Electronics Battery |
Questions about this item
How do I install the 54.8 mm by 35.5 mm Li-Polymer battery into my Harmony 1100, and what step do people get wrong?
Open the battery compartment, align the connector with the socket, and press firmly until it clicks; the step most people miss is seating the connector fully so the remote powers on.
What maintenance or replacement will the 1300 mAh 3.7 V pack need later?
Lithium-polymer cells degrade with charge cycles; expect reduced run-time after several hundred cycles and replace the pack when it no longer holds a full day's charge.
What limit appears first during sustained use of the 4.81 Wh battery?
The 1300 mAh capacity sets the run-time ceiling; under continuous backlight and RF use the pack will hit its energy limit and require recharging.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



