censreal
censreal 7 Port USB 2.0 Hub with Independent On/Off Switch and LED Indicators
Seven USB 2.0 ports with individual power switches and LED indicators expand a single connection for flash drives, mice, keyboards and printers at up to 480 Mbps
- Changer TypeOther
- Expand one USB port into seven for flash drives, mice, keyboards and printers
- Independent on/off switches with LED indicators let you power each device separately
- Built-in overvoltage, overcurrent, leakage and short-circuit protection keeps connected gear safe
- USB 2.0 delivers up to 480 Mbps transfer speed with backward compatibility to 1.0 and 1.1
- Works with Windows XP through 10, macOS 8/9/X, Unix and Linux without drivers
Seven USB 2.0 ports from one connection
This hub expands a single USB Type-A port into seven downstream ports for flash drives, keyboards, mice, printers and other peripherals. It is backward compatible with USB 1.0 and 1.1 devices so older accessories still work. The unit is aimed at laptop and desktop users who need more simultaneous connections than their machine provides. No driver installation is required on supported operating systems.
Per-port power switches with LED status
Each of the seven ports has an independent on/off switch and a matching LED indicator so you can cut power to individual devices without unplugging them. Built-in overvoltage, overcurrent, leakage and short-circuit protection guards connected hardware against electrical faults. The black plastic housing is designed for desk use and draws power from the host port without an external adapter.
USB 2.0 speeds up to 480 Mbps per port
Data transfers run at up to 480 Mbps, with automatic fallback to 12 Mbps full-speed and 1.5 Mbps low-speed modes for legacy gear. The hub is bus-powered, so total available current is limited by the host port and connected devices with high draw may need their own supply. Compatible with Windows XP through 10, macOS 8/9/X, Unix and Linux for broad system support.
Highlights
- Expand one USB port into seven for flash drives, mice, keyboards and printers
- Independent on/off switches with LED indicators let you power each device separately
- Built-in overvoltage, overcurrent, leakage and short-circuit protection keeps connected gear safe
- USB 2.0 delivers up to 480 Mbps transfer speed with backward compatibility to 1.0 and 1.1
- Works with Windows XP through 10, macOS 8/9/X, Unix and Linux without drivers
Specifications
| Changer Type | Other |
|---|
Questions about this item
What does the USB 2.0 interface cap the data rate at for each port?
Each of the seven ports runs at USB 2.0 speeds, topping out at 480Mbps with full-speed at 12Mbps and low-speed at 1.5Mbps.
What physical space does the hub need on a desk or in a bag?
The unit is a compact black block with seven USB-A sockets and a single upstream cable; it sits flat and needs only the footprint of the hub itself.
How is the hub installed and which step is often missed?
Plug the upstream USB-A connector into the host — no driver install is required — then use the per-port switches to power each device; forgetting to flip a switch leaves that port dead.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



