CDX2018123x4 Anti Static Bags 10pcs 11.8x15.7in 30x40cm
Ten resealable PET-aluminised bags measuring 11.8 by 15.7 inches protect motherboards, graphics cards and other large components from static, moisture and dust
- SizeMedium
- ColorBeige
- Color MappingBeige
- FeaturesPolyethylene Terephthalate (PET) with an aluminized film, 10
- Linear Inches15.7 L x 11.8 W x 0.1 H inches
- MaterialPolyethylene Terephthalate (PET) with an aluminized film
- Protects sensitive electronics with anti-static coefficient above 10th power
- Stores motherboards and graphics cards in 11.8x15.7in resealable bags
- Withstands ±500°C using PET with aluminized film construction
- Class II moisture resistance plus vacuum-sealable for oxidation prevention
- Translucent design shows contents while shielding from dust and oxidation
Anti-static bags for large components
This pack supplies ten resealable bags sized 11.8 by 15.7 inches for motherboards, graphics cards and similar large parts. The polyethylene terephthalate film with an aluminised layer provides an anti-static coefficient rated above the tenth power. Each bag includes a matching label for quick identification.
Thermal stability and moisture barrier
The material withstands temperatures from minus 500 to plus 500 degrees Celsius without degrading. A Class II moisture-resistance rating and a reusable sealing strip keep humidity out and allow vacuum sealing to prevent oxidation. The translucent body lets you inspect contents without opening the bag.
Included labels and resealable closure
Ten antistatic labels are bundled so you can mark each bag without extra supplies. The built‑in seal removes the need for heat sealers or tape, speeding up packing and repacking. Translucent walls keep dust off stored items while still showing the part inside.
Highlights
- Protects sensitive electronics with anti-static coefficient above 10th power
- Stores motherboards and graphics cards in 11.8x15.7in resealable bags
- Withstands ±500°C using PET with aluminized film construction
- Class II moisture resistance plus vacuum-sealable for oxidation prevention
- Translucent design shows contents while shielding from dust and oxidation
Specifications
| Brand | Lowepro - Wynit |
|---|---|
| Model | CDX2018123x4 |
| Part Number | CDX2018123x4 |
| Size | Medium |
| Color | Beige |
| Color Mapping | Beige |
| Features | Polyethylene Terephthalate (PET) with an aluminized film, 10pcs 11.8x15.7in/30x40cm, Large, 10, Rectangular |
| Linear Inches | 15.7 L x 11.8 W x 0.1 H inches |
| Material | Polyethylene Terephthalate (PET) with an aluminized film |
| Weight | 0.2 kilograms |
Questions about this item
How do I seal the 11.8x15.7in bag without extra equipment, and what step do people skip?
Press the resealable strip firmly from one end to the other after placing the component inside; the step often missed is ensuring the strip is completely clean and free of dust before closing, otherwise the seal can leak.
What part of the 10-piece set will need replacement first with repeated use?
The resealable sealing strip on each bag wears out before the PET-aluminised film; once the strip no longer closes tightly, the bag should be replaced to maintain Class II moisture resistance.
At what temperature limit does the bag material start to degrade under sustained exposure?
The PET with aluminised film is rated for continuous high and low temperature performance of ±500°C; beyond that range the material can become brittle or lose its anti-static coefficient.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



