We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass thermostatic mixing valve, 1/2 in NPT, 230 psi, 85 to 130 Degrees F

CASH ACME

CASH ACME HG110D Thermostatic Mixing Valve 1/2 in 230 psi bath faucet part

SKU CH-V9FW-3D22H

Thermostatic mixing valve with brass body, 1/2 in NPT connections, 85 to 130 Degrees F range and 230 psi rating

  • TypeOther
  • Precise temperature control with 85 to 130 degrees F range
  • High pressure durability rated at 230 psi maximum
  • Brass body construction for corrosion resistance
  • Multiple safety certifications including ASSE 1017, 1069, 1070
  • Lead-free compliance with NSF/ANSI 372 and 61 standards

Thermostatic Mixing Valve for Bath Faucets

The CASH ACME HG110D is a brass thermostatic mixing valve designed to blend hot and cold water to a safe, stable outlet temperature. It serves residential and light commercial bath installations where precise temperature control is required to prevent scalding.

Replaces manual mixing valves

The valve is worth installing when an existing system lacks automatic temperature compensation and users experience sudden temperature swings during pressure changes. It meets ASSE 1017, ASSE 1069 and ASSE 1070 standards for point-of-use and distribution applications.

Verify inlet and outlet connections before ordering

The unit uses 1/2 inch NPT threads on both inlet and outlet ports. Confirm that your supply lines match this thread type and size, and that the system pressure does not exceed 230 psi. The temperature adjustment range spans 85 to 130 degrees Fahrenheit.

Highlights

  • Precise temperature control with 85 to 130 degrees F range
  • High pressure durability rated at 230 psi maximum
  • Brass body construction for corrosion resistance
  • Multiple safety certifications including ASSE 1017, 1069, 1070
  • Lead-free compliance with NSF/ANSI 372 and 61 standards

Specifications

BrandCASH ACME
TypeOther

Questions about this item

What pipe threads and clearances does the 1/2 in NPT valve need to fit?

The valve uses 1/2 in NPT inlet and outlet threads, measures 2 3/16 in tall and 5 5/8 in wide, and requires enough space around those dimensions for wrench access and inspection.

How is the HG110D installed, and what step is often missed?

Thread the valve onto the hot and cold supply lines using pipe sealant on the 1/2 in NPT connections, then set the mixed temperature between 85 and 130 °F; the step often missed is verifying the outlet temperature with a thermometer after the first use.

When will the internal cartridge or seals need replacement?

The thermostatic element and O-rings should be inspected annually; replace them if the outlet temperature drifts outside the 85 to 130 °F range or if leaks appear at the brass body joints.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.