CARROFIX
CARROFIX CD-TP-QD-14 Quick Disconnect Harness 2014-2023
Quick-disconnect Y-harness adds Tour-Pak power to 2014-2023 Harley touring models with 34-inch plug-and-play wiring, no splicing required
- FeaturesQuick Disconnect for Tour-Pak
- Fitment2014-2023 Harley Davidson
- Quick disconnect lets you remove the Tour-Pak without tools
- Plug-and-play Y harness connects to the rear fender harness with no splicing or cutting required
- 34" wire length extends the brake/stop/turn circuit under the seat for easy access
- Fits 2014-2023 Harley-Davidson Touring models including Electra Glide, Road Glide and Road King
- Designed for OEM or add-on LED King Tour-Pak that already contains its own wiring harness
Quick Disconnect Tour-Pak Harness
The CARROFIX CD-TP-QD-14 is a Custom Dynamics Y harness that adds a quick disconnect point to the Tour-Pak wiring on 2014-2023 Harley Davidson Touring models. It plugs directly into the rear fender harness so no splicing or cutting is required during installation. The 34-inch lead extends the brake, stop and turn circuit from under the seat to an accessible connection for easy Tour-Pak removal.
Riders with OEM or LED King Tour-Pak
This harness suits owners who want plug-and-play convenience for attaching or removing a Tour-Pak that already contains its own internal wiring harness. Buyers whose Tour-Pak lacks the factory wiring harness will have nothing to plug into and should look at a complete wiring kit instead. It is also not intended for models outside the listed Touring range.
Plug-and-play Y harness with 34-inch lead
The bundled Y harness splits the rear fender circuit and provides a quick disconnect socket so the Tour-Pak can be detached for cleaning, transport or service without tools. Because it connects to the existing bike harness, it eliminates the need for permanent hard-wiring and preserves the original loom. The 34-inch length routes the disconnect to a convenient spot under the seat.
Highlights
- Quick disconnect lets you remove the Tour-Pak without tools
- Plug-and-play Y harness connects to the rear fender harness with no splicing or cutting required
- 34" wire length extends the brake/stop/turn circuit under the seat for easy access
- Fits 2014-2023 Harley-Davidson Touring models including Electra Glide, Road Glide and Road King
- Designed for OEM or add-on LED King Tour-Pak that already contains its own wiring harness
Specifications
| Features | Quick Disconnect for Tour-Pak |
|---|---|
| Fitment | 2014-2023 Harley Davidson |
Questions about this item
Does my 2014-2023 Harley Touring already need the Tour-Pak wiring harness installed for this CD-TP-QD-14 to plug into?
Yes, your Tour-Pak must already contain its own wiring harness; this Y-harness connects the bike's rear fender plug to that existing Tour-Pak harness, so without it there is nothing to mate with.
Will the 34-inch CD-TP-QD-14 reach the factory rear fender connector on a 2015 Road Glide without stretching?
The harness is designed to extend from the under-seat fender plug to the Tour-Pak mount point on all listed 2014-2023 models, including the 2015 Road Glide, so the 34-inch length fits the stock routing.
After installing the CD-TP-QD-14, how can I confirm the brake, turn and run circuits are all live?
Turn the ignition on, activate each turn signal, apply the brakes and verify the Tour-Pak lights flash and illuminate exactly as the rear fender lights do; matching behaviour confirms every circuit is connected.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



