We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PVC 90 degree elbow conduit fitting 1/2 inch schedule 80

Cantex

Cantex 5121053 90 Degree Elbow Schedule 80 PVC Conduit Fitting 1/2 In

SKU CH-538P-ZPVRQ

A Schedule 80 PVC conduit elbow that turns a 90 degree corner in a 1/2 inch run

  • TypeSchedule 80
  • 90-degree turn routes conduit cleanly
  • Schedule 80 PVC handles heavy-duty pressure
  • UL listed for code-compliant installs
  • 1/2 inch trade size fits standard runs
  • Grey PVC resists corrosion and impact

Schedule 80 PVC 90-degree elbow

The Cantex 5121053 is a 90-degree conduit elbow made from PVC and rated for Schedule 80 systems. It provides a right-angle turn in a 1/2 inch conduit run while meeting UL standards. The fitting is supplied new and carries the manufacturer model number 5121053.

Installers working with Schedule 80 PVC conduit

This elbow suits electricians and contractors who need a code-compliant directional change in Schedule 80 PVC raceway. It will not serve installations that require a different trade size, a non-PVC material, or a sweep angle other than 90 degrees.

Schedule 80 rating

The single specification that decides fit is the Schedule 80 designation, which determines wall thickness and pressure rating for the conduit system. Only conduit and fittings sharing this schedule can be joined together safely.

Highlights

  • 90-degree turn routes conduit cleanly
  • Schedule 80 PVC handles heavy-duty pressure
  • UL listed for code-compliant installs
  • 1/2 inch trade size fits standard runs
  • Grey PVC resists corrosion and impact

Specifications

BrandCantex
Model5121053
TypeSchedule 80

Questions about this item

How is the Cantex 5121053 90-degree Schedule 80 PVC elbow installed, and what step do installers often miss?

Solvent-weld the 1/2 in. trade-size hubs to Schedule 80 conduit using PVC primer and cement; the step often missed is applying primer to both socket and pipe before cement so the joint meets the UL listing.

What maintenance or replacement will the Cantex 5121053 elbow need later?

The PVC fitting itself requires no scheduled maintenance; inspect solvent-welded joints periodically for cracks or leakage and replace the elbow only if physical damage or UV degradation appears.

What limit shows up first on the Cantex 5121053 elbow under sustained use?

The Schedule 80 PVC wall sets the pressure and temperature ceiling; continuous operation above the material’s rated temperature or internal pressure will cause deformation before the UL-listed fitting fails.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.